Search results

This is a 4.8 gallon EAZ Cycle (google) flat bed fuel cell for the Gen1 and 2 Super T... PM or danieldyer2008@gmail.com tank has been paint since this picture and antenna mount rmoved Price is $400.00 plus shipping

Keep seeing issues with higher mileage bikes with carbon build up causing engine issue with the S10....Also seen LongHaul Paul and others run these motors 100,000+ miles with no such issues so what gives....I suspect the 2 biggest issues are running at lower revs and never getting bike to red...

So the instruction from the other threat read as followsTo install the Gear Position Indicator GiPRO-X (aka GPX) do the following: 1) follow the steps above, EXCEPT you DO NOT CUT the BLUE wire. The WHITE lead from the GPX is simply tapped into the BLUE wire using the supplied POSI-LOC tap...

the FPX -Pro indicator tap wires....All the previous threads pictures are gone.... both connections are suppose to be on the left ecu connector.... I can't find a solid blue wire they all have either stripes or dots on them...I did find a Blue with not strip but it had brwn and white dots....And...

the service manual show a tight ing sequence going over each bolt 2 to 3 times...question do I hit it with the 9.6 ft pounds each time or just part of it??? confused.... Dan

I installed a manual CCT last valve check...an APE unit...From everything I have read the adjustment should be tension on the guide then backed off 1/2 turn...Thing is my buddy who helped with the install said it should be turned in 1/2 a turn... Bike runs fine with not weird noises or rattles...

Just mounted a PR4 trail up front....what to run in the back??? Looking for miles....so PR4 trail, PR4 standard or Anakee III....??? I have run a set of PR4's before and a set of Anakee's didn't have issues with either.... Well the front Anakee wore funny.... BTW last set was Shinko's 700's...

planning on doing a fork service this winter on my 2012...Question should I stick with OEM Seals ans bushings or are the one All Balls and Race Tech sell just as good or better than stock....????

This is Ernie's lasted design for the Tenere...Give him a call if your in the market....http://eazcycle.com/ I elected to have Ernie paint it primer grey to protect the aluminium until I can get it painted or powder coated...What color should I do???? Dan

been used for appox 6000 miles.....went back to the quieter stock muffler....$199.00 plus shipping COUNS Paypal add 3% Dan

what does it mean when there is oil in the air box, not a lot but more than just a flim or coating....Isit come from the crankcase breather??? Dan

Try to gain a few MPG on my Tenere think some of my mods have adverse effect on this goal.. Reflash ECU mostly ride in sport mode.. 3/4 turn out on the TB's C02 @ 3 Arrow exhaust... thoughts Dan

so I have a set of pelican 1550 caribou side case on my 2012 that I like well enough but my wife has problem getting on and off the bike with them...She has to get on first with the bike on the side stand and I have to do a flying karate kick to mount up...Huge pain in the a$% and she keeps...

So I have a pair of these lights on order...A friend that does Iron Butt Rides/Rally suggested them http://ledrider.com/shop/?model_number=LR4..I would like to be able to have 3 different setting on these...Off/On 50%/Full with High beams....Looking for dimmer/switch ideas...Ideas??? Dan

looking for a strap mount tank bag....Just needs to be big enough to put a 3 liter water bladder (camel back) type in....Go!!! Dan

Alt rider is working on upper crash bars for the S10 Dan

i usually crank her up above 5000 when I am riding a good twisty road...The other day on the way home from camping I kept her at 3500 to 4000 rpm and I think it actually made me faster not to be pushing the bike so hard...Anybody else?? Dan

Bike is an 2012 with a ECU Unleash gen 2 flash...But this issue was before the flash and since new...Miles and the flash have helped....Bike has about 6000 miles on it and has smooth out a huge amount over that time...Trying to just fix one last issue to make it perfect.....When I roll throttle...

Brand new Yamaha Super T tank bag with powerlet power pass though.......Never used...$95.00 + $15.00 shipping Dan

So here is my story...After getting my Penkse shock from Nick I had 50 mm of sag right out of the box...and that is how I have been running it tell last week when I added luggage to it...I cranked in 2 more turns of preload...So now the wife is gonna take a trip with me so I decided to put 2...