tomatocity
Active Member
2011 Site Supporter
2012 Site Supporter
2013 Site Supporter
2014 Site Supporter
Did a search for a Wunderlich/Hepco Becker Skid Plate and did not find one being used. Other than cost are there any reasons?
Thanks for the information. Good tip on the hole to clear the mounting bolt. How much did you trim from the Fenda Extenda?Berg_Donk said:I have the HB plate and WP guard fitted with AltRider bars.
I trimmed the plate a bit on the RHS to make a bit more space for my big feet. Pushing down didn't always connect with the brake! The corner where the maintenance charger cable passes in the 2nd pic below. Probably have to do this for the others too. The pics I saw showed a riveted construction, but mine is welded. I also cut a hole under the sump lug so if if takes a big enough hit it will straddle it rather than punch it through.
It fits well, is easy to take on and off for service, doesn't mount to the engine, and hopefully tough enough, and for me, the price was right on the day.
About 70 mm after advice from the inmates and some testing. Written up a bit over on ADV FWIW:tomatocity said:Thanks for the information. Good tip on the hole to clear the mounting bolt. How much did you trim from the Fenda Extenda?