What you did to your Tenere today??!!

[Hfjeff]

Ordered my Madstad windshield and bracket. 20% off now through 12/31 with code SAVE20A and returns accepted until April. I have been on the fence about ordering this early, but with these offers I could not resist.

 

[Stridey]

Hmm I wonder if I could just plug a US spec flasher unit it, I'm sure it would be fine in the UK as the Africa Twin has them on permanently. I think I need to investigate!

Sent from my SM-G930F using Tapatalk

Yes. Interesting. Let us know how you go with that. A good way to add extra running lights and making the more visible triangle without hopefully too much trouble?


Sent from my iPhone using Tapatalk

 

[lddave]

Installed Givi case racks today . Yesterday ram mounts for phone and Garmin InReach .

Sent from my iPhone using Tapatalk

 

[bigbob]

Said stay warm on the battery tender. It got up to 14 today. -18F Sunday night.

 

[EVLED]

Got her dirty.

 

[Grumpy]

Fitted one of these to my gen.1, It's for my new TomTom, although it has drillings for other makes. I had to cut off the top half inch of the mounting plate to fit the Tomtom anti-theft lock, but now I don't have the satnav mounted on the bars and obstructing part of the clocks.

http://engimoto.it/prodotto/supporto-gpsnavigatore-iphone-sopra-strumenti/

 

[Don in Lodi]

Did my 16th oil change today.
::018::

 

[tomatocity]

I too always run a bag or box on the back of my bikes for the same reason. I have a Moose adventure bag that came with the purchase of the tenere. My bum leg really benefits from the slightly lower rear plate. So much easier to swing it over, even with the bag on the rear. I also never have a passenger so no real need for a passenger seat.

I was liking the Moose Racing rear bag and discovered it has been discontinued / no longer manufactured. Bummer!

 

[hawk281]

Installed Givi case racks today . Yesterday ram mounts for phone and Garmin InReach .

Sent from my iPhone using Tapatalk

watch the lower mounts, they work loose. i locktighed mine.

 

[Big Bill 51]

So I was putting some fuel additive in my bike a few weeks ago, when the spout from the bottle dropped in the fuel tank. Probably could have left it in there but with my luck it would have caused problems down the line. Pulled the tank yesterday and thought I would just turn it upside down and it would drop out ...no luck. Next step was to pull the fuel pump in the bottom of the tank, according to the Service Manual you should/must change the seal which I didn't have. The bike is just a year old so I replaced the fuel pump with the old one and worked out OK as I have no leaks, not a bad job and something I don't have to worry about.

 

[raynchk]

Installed the heated grips (OEM). Went ok, but instructions were pain in the ass. Last little job was cyclops headlights and before that I added a Puig touring windscreen (dark smoke) and OEM wind deflectors.

 

[jimmy z]

Better late than never.2012 with 50k.Never been apart except for 1 valve check.Front and rear suspension off.Triple tree removed.New bearings on triple tree (my fault no maintenence).New .95 fork springs new 10w fork oil.Penske double clicker out back.Swingarm lubed.Speed bleaders on brakes.New brake and clutch oil.Graves cct installed.New battery.Come on spring!!!

 

[Grumpy]

Better late than never.2012 with 50k.Never been apart except for 1 valve check.Front and rear suspension off.Triple tree removed.New bearings on triple tree (my fault no maintenence).New .95 fork springs new 10w fork oil.Penske double clicker out back.Swingarm lubed.Speed bleaders on brakes.New brake and clutch oil.Graves cct installed.New battery.Come on spring!!!

Hi, can you tell what speed bleeder size you ordered? I don't see the S10 in the list>

 

[TomZ]

Posted info on the speed bleeders a few years back.
http://www.yamahasupertenere.com/index.php?topic=13895.msg219154#msg219154.

It's been awhile, but I think the SB7100L (M7x1.0 thread) for the rear brake caliper should actually be SB7100 (no L as they say at Christmas).
I also put speed bleeders on my 2015 ST -no regrets.

 

[jimmy z]

Hi, can you tell what speed bleeder size you ordered? I don't see the S10 in the list>

Not sure on part numbers,above post should help.I ordered over phone from Nick Stoltec along with front springs and rear shock.I believe i paid $7.00 a piece.

 

[Grumpy]

Thanks for the info. $7 each? They cost about 3 times that over here.

 

[tallpaul]

Bought one! A 2016 ES with oem side cases, full arrow system and some other bits and pieces. I collect it next Saturday.

 

[Nikolajsen]

::012:: congrats...

 

[Kwatters]

Nothing yet, winter is in full swing but I bought a SW-Motech engine guard, Denali D4 2.0 auxiliary lights, windshield brakets that user Propsoto sells, and waiting delivery on Denali Datadim controler and auxiliary lights bracket. Now, if spring can come early.

That is what winter is for. No garage?

Sent from my SM-G930V using Tapatalk

 

[Checkswrecks]

Bought one! A 2016 ES with oem side cases, full arrow system and some other bits and pieces. I collect it next Saturday.

Congrats on the new beast!