What you did to your Tenere today??!!

[inglysh]

Took it out of storage!!!!!

 

[CaptShaq]

Rode 150 glorious miles! ;D Almost done with break-in. Service scheduled for next week.

 

[barkingllizard]

successfully adjusted the dash clock, one hour forward, without having to dig out the manual.....

 

[eemsreno]

Rode 150 glorious miles! ;D Almost done with break-in. Service scheduled for next week.

Rode 400 glorious miles ;D Almost done with break-in. No service scheduled for next week.

 

[Kwatters]

Picked it up from the dealer! 50 wonderful miles home. Hit some country roads and splattered a bit of mud on it from some still sloppy roadways. Breaking it in right; -)

 

[AwesomeUsername]

Put on the yoshi pipe and am eagerly awaiting my DDM HID's to slap in this weekend. ::013::

 

[yamabob]

Installed my new Laam seat, but haven't had the chance to test drive it yet.

 

[Spaggy]

Rode 400 glorious miles ;D Almost done with break-in. No service scheduled for next week.

Regarding break in, my dealer told me in the first 100 km take it easy but don't baby it. Let it go through 3 cycles of operating temp to complete cool down. Then ride it like you stole it. Change break in oil at 500km and done.

 

[RockyDS]

Dropped my wife off at work and went for a ride. Not my first ride of the season but it's great now that the snow has nearly gone and I can easily get out to the highway ...

 

[AwesomeUsername]

Just put in a set of HID's from DDM. Night and day difference, holy crap. Love it.

 

[nga]

Rode it a while!!!!!!!!!!!!

http://www.yamahasupertenere.com/index.php?topic=13640.msg233180;topicseen#new

 

[racer1735]

The bike is still on the lift awaiting its shock from Cogent Dynames, so I took the opportunity to pull the spacers out of the linkage and greased the needle bearings. I know the bearings have the 'string cheese' in them, but a little grease applied with my finger sure makes things operate smoothly.

 

[2112]

Today I fabricated a bracket to mount my Garmin sat nav to my Touratech mount, just needs powdercoating to finish it off.

 

[Harry Dresden PI]

Changed the oil filter and rear end gear oil. Have a few longer trip this week and wanted to start off with fresh oils.

I used Yamaha 10W-50 oil, K&N Filter and 85W90 Gear oil. Likely to change away to Mobil 1 oil and gear oil next change.

Oil leave sight glass shows oil middle level (Measured oil 3.6 US QTs from a 4 QT oil bottle)

Oil filter engine surface was marked with the OEM filter rubber gasket. Did not scrape tit off just rubbed it clean.

Gear oil filling was a pain as I could not see how I was filling and overfilled a few ounces so had to let it drain for a few minutes.

 

[frez]

24,000 mile service. All 4 exhaust valves were too tight, adjusted them to just under maximum. All 4 inlet valves were fine.

 

[nga]

Installed a Holan headlight guard!!

Sent from my iPhone using Tapatalk

 

[CaptShaq]

Just got back from a ride with the new Osram NightBreakers. Whiter, stronger, more noticeable (so it seems - even in the middle of the day you can clearly see their reflection off road signs). Great improvement over stock bulbs (kept as spares). By far the cheapest frackle ($29) so far...

 

[jbjke]

Final drive change

Two nights ago 600 mile oil change


Sent from my iPhone using Tapatalk

 

[jbjke]

Final drive change

Two nights ago 600 mile oil change


Sent from my iPhone using Tapatalk

 

[jbjke]

Took wife on a two up on the '12 S-10 then changed over to the '14 ES and rode some more.

Final drive oil change tonight on the '14

Two nights ago 600 mile oil change (2014)


Sent from my iPhone using Tapatalk