What do you think about CyClop light bar for super tenere?

[firstime911]

https://www.cyclopsadventuresports.com/Yamaha-Super-Tenere-LED-Light-Bar-kit_p_128.html

Should i get it or some other brand like Rigid LED SR pro 6" instead? knowing the price of Rigid LED is lower.
Any recommendation?
Well i don't really do any offroad, purely street, reason mostly just cosmetic reason. I have piaa horn installed underneath the headlight just want to find light bar to cover it. Hence, i going to spend some money, why not make it functional as well.

 

[Cycledude]

$350.00 Very expensive but supposedly it does come with a lifetime warranty.

 

[Tenman]

I've got a rigid 6". It's 5 years old and no problems. Badass.

 

[mrpete64]

I, too, have used the rigid 6" bar and it has worked perfectly since 2014.
Mr. Pete------->
aging hippie

 

[Clawdog60]

I think cyclops is gouging consumers even if they’re stuff is good. Just because we ride motorcycles

 

[WJBertrand]

Way overpriced. I've seen eBay knock offs (some of my friends have them) and we can't tell the difference between them and the Rigid branded ones. In fact, except for the name, they appear identical.

 

[HeliMark]

Rigid 6" light bar here for 70K miles, and going strong. I have had two of the Cyclops headlight bulbs go out, so I would not be so keen on their light bar, much less at that price.

 

[firstime911]

Does IQ 275 Skene work with Rigid Light bar ?? If not how do you guy mount the switch?

 

[yamabob]

I used the Skene with my Rigid light bar for a number of years. Skene says it's not compatible, but it finally failed. I loved it when it did work though. Had it set "on" for 20% light output and 100% when you hit the high beams. Once the Skene controller failed, I just set it up to an on/off switch. I took a chance on it, but it finally died. Double check and make sure it will work for the light you want to use.

 

[AVGeek]

Does IQ 275 Skene work with Rigid Light bar ?? If not how do you guy mount the switch?

The Skene controllers work on the negative side of the circuit, so if the lights ground through the housing, they won’t work.

 

[fac191]

The Skene controllers work on the negative side of the circuit, so if the lights ground through the housing, they won’t work.

https://www.amazon.co.uk/MICTUNING-MIC-5DP30-SR-M
I have one of these. Fits with just a change bolt lengths and some spacers with the supplied brackets. It ain't gonna frighten deer but for the money it seems ok.

 

[Checkswrecks]

Same Rigid since 2012 and moved when I replaced the Gen1 bike with the Gen2. Still works great.

 

[Ron Earp]

I got a $80 LED light bar and it's been kicking it since around 2016. Extremely bright, was easy to mount with a little modification of the brackets that came with it. No way I'm paying $350 for a light bar.

 

[scott123007]

I got a $80 LED light bar and it's been kicking it since around 2016. Extremely bright, was easy to mount with a little modification of the brackets that came with it. No way I'm paying $350 for a light bar.

Same here, except now they're down to about $30.

 

[firstime911]

I got a $80 LED light bar and it's been kicking it since around 2016. Extremely bright, was easy to mount with a little modification of the brackets that came with it. No way I'm paying $350 for a light bar.

What brand and model? Thank you

 

[Ron Earp]

Let me look on it and see if there is anything of note identifying it. It came off the web and I can't remember if it was Ebay or an LED light store.

 

[GearDriven]

I've had two Cyclops H7 headlight bulbs burn out on me (running near daily all year). Cyclops provided good service on the first one...by the second one I decided to pop back in conventional bulbs. The cyclops are sort of a pain to replace. Now I'm in your boat, looking to put an aux light(s) in place. I bought the MICTUNING bar linked above (based on other's usage) and the Skene controller. Just need to install (along with my Eastern Beaver PC-8). Need to fab a stainless bracket with all the salt here.

 

[Xclimation]

On the front of my bike and a picture of the bike I have a light that I paid $19.99 from China. It’s just as bright if not brighter than the rigid or the cyclops. I’ve had it on the bike now for about three or four years no problems at all. Did I mention that it is bright as heck!

 

[firstime911]

What about this brand Black OAk? I see they do 6” light bar as well,.

 

[gprogers]

I got a nice light bar from princess auto here in Canada for about $35