I have seen the question asked in several threads if these 2 products are compatible.
It couldn't be easier!
The 2 Rumbux rear frame mount tabs attach to bolts that have nothing to do with the Givi bars.
The 2 front mount tabs on the Rumbux lowers share the same mounting point as the Givi "Tube" mounts use. 1 on each side. (The most forward of the tube mounts)
If you simply remove the 4 bolts that are inside the tubes on the Givis, they are still held in place by the other attachment points. But the Tube mounts are now loose enough to pull the Givi tubes away from the frame enough to swing the Rumbux mounting tabs up into position.
Now you simply replace the tube bolts with the appropriate longer ones. Note, that because the Rumbux tab is in between the Tube and frame, the other Givi tube needs some kind of washer(s) to make up for the Rumbux tab thickness.
Now your Tenere is ready to roll over and play dead.
It couldn't be easier!
The 2 Rumbux rear frame mount tabs attach to bolts that have nothing to do with the Givi bars.
The 2 front mount tabs on the Rumbux lowers share the same mounting point as the Givi "Tube" mounts use. 1 on each side. (The most forward of the tube mounts)
If you simply remove the 4 bolts that are inside the tubes on the Givis, they are still held in place by the other attachment points. But the Tube mounts are now loose enough to pull the Givi tubes away from the frame enough to swing the Rumbux mounting tabs up into position.
Now you simply replace the tube bolts with the appropriate longer ones. Note, that because the Rumbux tab is in between the Tube and frame, the other Givi tube needs some kind of washer(s) to make up for the Rumbux tab thickness.
Now your Tenere is ready to roll over and play dead.