Removing OEM Hardcase Racks

Joined
Sep 6, 2018
Messages
86
Likes
55
#1
I was just about to remove the mounts for the Hardcases but I noticed a strange looking bolt that is holding it on, looks like a Hex head but there is a centre part to it. How do I get this bolt off?
 

Kyle_E

Well-Known Member
Joined
Mar 3, 2019
Messages
227
Likes
259
Location
Las Vegas
#3
You need a security or sometimes called safety torx bit. Not sure of the size at work and don't have a set to check here. Like @gv550 said my top of the head guess is 50.

If you live near a harbor freight they will have a set for under $10. Or hit amazon.
 
Joined
Sep 6, 2018
Messages
86
Likes
55
#4
You need a security or sometimes called safety torx bit. Not sure of the size at work and don't have a set to check here. Like @gv550 said my top of the head guess is 50.

If you live near a harbor freight they will have a set for under $10. Or hit amazon.
Don't think we have any Harbor Freights in Canada but I would think Princess Auto will have it, similar type store. Will pop and confirm that later tonight...Thanks guys...
 

navynuke

Active Member
Joined
Dec 16, 2013
Messages
211
Likes
58
Location
La Habra, CA
#5
I had to get mine from Amazon, why are you removing?

The brackets are light, provide good tie down spots and i i haven't hurt them in many offroad blunders when the bags are off.

Sent from my SM-G892A using Tapatalk
 
Joined
Sep 6, 2018
Messages
86
Likes
55
#9
I had to get mine from Amazon, why are you removing?

The brackets are light, provide good tie down spots and i i haven't hurt them in many offroad blunders when the bags are off.

Sent from my SM-G892A using Tapatalk
I got some soft bags, Altrider Hemisphere ones, and I have to remove the mounts for the hard bags to mount the loop type brackets on in their spot.
 
Top Bottom