Hey guys, here is hoping you can help. Twisties had posted his Jesse top case install quite a few months back and I got to see the mounting plate. I also looked at the video and photos from Jesse concerning the Tenere.
Since Twisties post and the stuff on Jesse luggage, it seems like there have been some updates.
This is what Jesse now includes in the package. Below is the replacement for OEM rear carrier. It comes with aluminum stand off spacers similar to the spacers when doing the pannier installation:
below is the part of piece of the quick release plate which should attach via included 4 screws/washers/locknuts.
This is the piece that does not look like Twisties or on Jesse luggage site and does not seem to fit on their tail plate
This is the plate that gets mounted to the bottom of the top case and slides on to the above plate, which I have to assume is a universal fit piece:
and finally this plate(again I assume a universal piece) gets mounted inside of the top bag, where you can use it as a template to drill thru the top bag and permanently fix the sliding plate above with the provided fasteners.
My question is, has anyone else been given the quick release base plate like what I pictured, or did I get sent the wrong part?
One thing I noticed is that Jesse does not provide any instructions with their product and when you are dealing with a variety of parts and fasteners for a world class product, it would be nice for the DIY guy to get some direction!
Hopefully someone can help. I did the searches on Google and nothing seems to come up other than Twisties post being the most similar.
Thanks!
Since Twisties post and the stuff on Jesse luggage, it seems like there have been some updates.
This is what Jesse now includes in the package. Below is the replacement for OEM rear carrier. It comes with aluminum stand off spacers similar to the spacers when doing the pannier installation:
below is the part of piece of the quick release plate which should attach via included 4 screws/washers/locknuts.
This is the piece that does not look like Twisties or on Jesse luggage site and does not seem to fit on their tail plate
This is the plate that gets mounted to the bottom of the top case and slides on to the above plate, which I have to assume is a universal fit piece:
and finally this plate(again I assume a universal piece) gets mounted inside of the top bag, where you can use it as a template to drill thru the top bag and permanently fix the sliding plate above with the provided fasteners.
My question is, has anyone else been given the quick release base plate like what I pictured, or did I get sent the wrong part?
One thing I noticed is that Jesse does not provide any instructions with their product and when you are dealing with a variety of parts and fasteners for a world class product, it would be nice for the DIY guy to get some direction!
Hopefully someone can help. I did the searches on Google and nothing seems to come up other than Twisties post being the most similar.
Thanks!