cavenger
Member
I am installing some P3 Skene lights with turn signals. Below is a diagram of how they should wire up. My question is, on the turn signal wiring. I *think* am looking at the right side turn signal wiring. I have taken off some of the insulation to reveal the wiring. There appears to be two wires in there and they appear to be stuck together. One is a black wire and the other is a green wire. I am assuming I can pull those apart so I can wire up only to the green wire. Sorry for the newbish question, but I don't want to screw this up.
https://static.wixstatic.com/media/648237_c287dac3f42744a18c5686987d07a7a7~mv2.jpg/v1/fill/w_800,h_617,al_c,q_85/648237_c287dac3f42744a18c5686987d07a7a7~mv2.webp
https://static.wixstatic.com/media/648237_c287dac3f42744a18c5686987d07a7a7~mv2.jpg/v1/fill/w_800,h_617,al_c,q_85/648237_c287dac3f42744a18c5686987d07a7a7~mv2.webp