Search results

thanks for the encouragement :) i was sourcing for calipers and on ebay there were some good condition used brembo m4 that came off ducatis and triumphs that are going for low to mid $300s per set. coupled with the $145 for the brackets, itd be quite a bargain for about 500 bucks for the whole...

Hello all, this is a repost from the other thread of upgrading to brembos on my S10 here are some details.. Master Cylinder is a Brembo RCS19 Calipers are Brembo GP4RS 108mm (4x30mm pistons) with Z04 Sintered Pads Brackets are from 98-03 R1/ 06~ FZ1 (bracket fitment is 95% good just that need...

hi all, just changed my brake lines to steel hoses.. initial bleed till no bubbles was no good as both the front AND rear brakes were squishy.. rebled the whole system thru and it was fine this time.. went thru 2 bottles of dot4s to get it right.. just need to be patient and i used all the...

hello all, hope everythings well and everyone has been emjoyimg their S10s.. :) i just installed the ohlins suspension on my bike today.. been thinking about it for the longest time but just have not been able to bite the bullet and take the plunge... its only after 2.5years and the stock...

wow thanx all for your inputs.. well what i meant in e first place by brembo upgrades was bigger callipers -> bigger pads hence more contact area for better brake energy conversion, esp at high(er) speeds.. not to the extent of brake fade.. i do understand that by changing e master cylinder...

hello all.. just wanted to know if anyone here has done upgrade or are intending to upgrade to Brembos? i am a great big fan of big powerful brakes as this relate directly to safety.. i looked at e Brembo website and so far there are no direct plug and play upgrades for e S10.. however i...

the book says 3.49 qts with oil filter change.. which is about 3.4 litres.. when i did mine, 3.4litres went in and also no oil in e sight glass.. after about 0.5 litre more then the level in e glass came on to e correct level.. been riding for more than 2 weeks since and oil level is ok..!! :)

i agree with not tempering with the location of the intake air temp sensor too.. my experiences with cars IAT sensors have taught me not to disturb it.. even a simple opening of another port in the air box system would screw up the reading and cause the engine to run off.. from car experience...

oh wow thanks for all e valuable inputs..!! am thinking of installing a pair of HID head lights and a pair of HID fog/sport lights.. intending to use this brand called Vision from korea.. have been using them on my subaru, mitsubishi, gilera, and vespa.. in total have bern using them for more...

hi all, just wondering if any bros (n sis) here has HID installed on their S10? where would one hide e ballast and also would the current draw burn any wiring harness or fuses? was thinking of doing a set of HID fog/sport lights too but then again the issue of positioning e ballast came back...

hi all, i read e post about the power restriction on e first 3 gears of e bike and i must say its a big wet blanket on such a wonderful machine.. its weird having a forth gear that pulls stronger then the third..!! anyway of getting around it without going thru the expensive ecu flashing or...

wow thanks for e warm welcome..!!! i got e impact blue one.. 5 days in and i already got a fender extender, a rear brake extender and a bigfoot :) roger wilco on e picts will find a nice sunny day to take some and upload.. meanwhile ride safe all..!!

hi bro im v interested in e headlight protectors..!! can i pick them up from you? also do you have e size for e f800r?

Hi fellow fans of e Super Tenere, my name is Byron and i hail from singapore.. collected my dream machine recently and super enjoying it!! was a BIG GS fan until i was introed to e super ten... it was love at first sight..!! (actually more like lust at first sight) this machine is everything...