Huck's latest activity
-
The weatherstrips on the tank, mainly the left and right side, are prone to holding in water. I had my tank off to do service and... -
-
This is the second time it has been done. I found that if you remove three fasteners holding the brake lines,and zip tying to the left...
-
Huck replied to the thread Mobil 1 4t 10W40 for Super Tenere?.HOW, DARE YOU. ahhaahah So I had no idea there was a motorcycle specific oil a week ago. Time to switch things up anyways.
-
Huck replied to the thread What you did to your Tenere today??!!.The limited space is the worst part. It makes it very difficult to get the valve cover off, and back on with the gasket staying where it...
-
Did the dreaded valve check. All were within spec. The water coming through the ignition coils is incredible. Will have to get that...
-
Leaving for AK on June 1st so...changed oil, filter and final drive lube today. Next up, swap the A41's for Trailmax Missions and the...
-
Paid it off today :cool:
-
Huck replied to the thread What you did to your Tenere today??!!.Rusty pipes, cleaned up with 150 grit sandpaper.
-
-
I had to do the same. The previous owner changed one of the fork seals and made multiple knicks in the tube while reassembling; likely...
-
Huck replied to the thread Sanding forklegs.I made crosshatches. Diagonal one way, then the other.
-
Huck replied to the thread Sanding forklegs.The bikes got 77k. The seals might have just been shot to be honest. I was able to catch a fingernail on the streaks, so I was convinced...
-
My forks were leaky, and there were black streaks that wouldnt clean off with degreaser, so I replaced the legs. This gave me a chance...
-
-
Huck replied to the thread What you did to your Tenere today??!!.Took the tail off and wired in a power connector into the taillights. Then wired in a usb charger thru the luggage box. Really wanted a...
-
-
This is my setup... I hope I never need them myself, but maybe I can help someone else. :) Depending on the situation, the tire repair...
-
Huck replied to the thread Side case locks, rekeying?.Just curious. Might try rebuilding the ones I've got. Thought Id ask if they are sealed before I dig.
