Recent content by 528Hz

anyone around Pensacola or near by there?

Hey An...how you been brother? Hope this works out for you. These 1st gens did come with some gremlins, but as you say if you keep pressing on them and dealer cooperates, they will work with us riders, especially when this becomes a hazard to life. You got a new harness, I got a brand new engine...

If you have flash to pass on yr bike, toggling high beams on before the curve and going through it helps as it seems to widen the light path some, especially if you have hids or something better then stock bulbs. Or you can just flip high beams. Aside from that, as you said, add more light with...

okay, makes sense. thanks! now, the original 3/4 of a turn out recomendation, is that fully screw in then turn 3/4 out, or from position that I find them from the factory where they are now? 8)

Carbmate is now is NYC area for the experimenting mind types ::022:: Hey guys, any adjustments done at higher rpm range, say 3500-4000 or idle only? I just got carbmate, will be doing TB sync. Ever since my st received new engine with new TB in 2015 under warranty, idle could have been better...

I have used Mitas and heidenau. Great tires. I ran E07 dakars on the dempster. Performed well, knobs would have been better ofcourse in how muddy it can get. Testing out Shinko 804/805 nowadays. My friend ran them on F800 and was very impressed. They are 60/40 knobies and he got about 7K out of...

432 is in for a bigger tank ::001::

welcome. yes, paint it white. white is faster ::003::

I have risers 1 up and 1 back, topped off with 2.5 inch rox pivots, I need more tapering. I want to sit as upright as possible. I like to sit at the rear part of the seat, so from there i gotta lean forward. I have long lines from jax. i want to sit like this ::001::

Hey guys, could you recommend some handle bars that are more tapered towards the rider. Thanks! I would really like those grips to be at least 2 inches closer from where they are stock on a 13 model.

Re: 100,000 miles. this is awesome paul. did you replace clutch, cct at some point? Anything else?

what a scam to sucker riders in to overpay for oil. good luck putting a claim through. probably requires dealer service too.

Everything is up to a dealer actually. Clutch basket from 14 has not been tested on a 13 model officially. Some tenere owners have swapped it out. It works, but it's not "officially approved" so to speak, so a 13 basket still has a 12/13 pat number. Tensioner has a superseded part, so you are...

Super tenere is just okay imo. It does handle somewhat well if you upgrade suspension and has a good balance if its not too loaded. Makes good power with ecu update. At this point its probably the best your money can buy out of the pool of marginal bikes on the market today in big size dual...

It was japan that recalled basket with a broken spring back to the factory in japan for study. I am also aware of the fact that someone from japan was involved directly into the original middle gear bearing replacement request. So while japan may appear to be exempt from my ragging, they are...