Recent success in pairing an old Sena SMH-10 with a J&M unit. Long frustrated trying to connect different brands. Sena tech support was very good in providing great videos to explain the nuances.
"To do a Universal Intercom Pairing, please try to watch the video suggested below for your reference:
To do a Universal Pairing for the SMH10, please follow the steps below:
1. Turn on the SMH10 and a non-Sena Bluetooth headset which you want to pair with.
2. Press and hold the Jog Dial on the SMH10 for 8 seconds until the blue LED flashes rapidly. You will hear a voice prompt saying “Universal intercom pairing”.
3. Perform the operation required for handsfree pairing on the nonSena Bluetooth headset (refer to the users’ manual of the headsets you want to use). The SMH10 will automatically perform pairing with non-Sena Bluetooth headsets in pairing mode."
Worked like a champ. The key is universal pairing uses Bluetooth not the RF between bands. Range is not great but better than buying new coms. Just thought I would share here...
Sent from my SM-S918U using Tapatalk
"To do a Universal Intercom Pairing, please try to watch the video suggested below for your reference:
To do a Universal Pairing for the SMH10, please follow the steps below:
1. Turn on the SMH10 and a non-Sena Bluetooth headset which you want to pair with.
2. Press and hold the Jog Dial on the SMH10 for 8 seconds until the blue LED flashes rapidly. You will hear a voice prompt saying “Universal intercom pairing”.
3. Perform the operation required for handsfree pairing on the nonSena Bluetooth headset (refer to the users’ manual of the headsets you want to use). The SMH10 will automatically perform pairing with non-Sena Bluetooth headsets in pairing mode."
Worked like a champ. The key is universal pairing uses Bluetooth not the RF between bands. Range is not great but better than buying new coms. Just thought I would share here...
Sent from my SM-S918U using Tapatalk