Under headlight cover/beak mod for Denali bracket

[Desoto]

I just pulled the trigger on a set of Denali D4 2.0 auxiliary lights and the bracket (LAH.06.10000) that bolts under the headlight that positions the pods on either side.

http://www.twistedthrottle.ca/denali-auxiliary-light-mounting-bracket-for-yamaha-xt1200z-super-tenere-11-14

In the bracket reviews, they say that I need to trim the cover/beak under the headlight a small amout so I can mount it back. Does anyone of you got that same bracket and modified the cover? How simple is it and do you have pictures of the modification?

I ride a 2016 S10.

 

[bimota]

hi,
fitted that bracket to my 2013 wc 2 months ago it was a perfect fit 4 bolts no cutting at all.

rob uk.

 

[bimota]

picture with lights

 

[bimota]

+1

 

[Dogdaze]

Gen 2 bikes differ from Gen1 with regards the small cowl under the headlight. Take a Dremal to the cowl for the bracket to fit.

 

[bimota]

with,
yahaha spots and denali bracket plus visionx spots, iwas ok the bracket bolted on no issues.

 

[AVGeek]

You also have the option of removing the cowl completely.

 

[Don in Lodi]

You also have the option of removing the cowl completely.

::026::

 

[bimota]

hi,
it is the same bracket and part number, the 2 big round yamaha lights are fitted seperatly the 2 smaller square lights are fitted to the denali light bracket

rob

 

[bimota]

hi,
if you look at the pic's of my bike addes the denali light bar is fitted to the bike then the yamaha spots are fitted to it under the headlight, then the denali bracket sticks out to the side where then i have fitted 2 square visionx spots to it.
rob

 

[Checkswrecks]

picture with lights

If you mount the lights inboard like that, put the bike on the center-stand to fully extend the front end, then measure up from the fender. The suspension travel is 7.5" and if you don't have that much you will sooner or later break the lights or fender.

 

[Kabish]

I installed the same lights and brackets on my 2015 a few months ago. I had to do zero modifications to the bike in order for the brackets to get put on, they just bolt right in.

I also purchased the light module, love that thing. Lights are incredibly bright...