Super Tenere 2014 faults and problems, early fixes for them. (also legacy problems from earlier mode

Joined
Jan 24, 2014
Messages
111
Location
Bogotá Colombia South America
Re: Super Tenere 2014 faults and problems, early fixes for them. (also legacy problems from earlier

ST RECALL

here is an image of the recall that Yamaha has made for up to the 2013 model. It's seems that 2014 faults does not gave the headlight conector failure.



Juan Valderrama
XT1200Z
Broadcasting from Bogotá - Colombia.
 

Hanson

New Member
Joined
Feb 2, 2014
Messages
2
Location
Texas
Center stand is featured for 2014 base model on US website.

On yamahamotorsports.com, the US website, the last item listed under additional features:

"Both side stand and center stand are provided for complete parking convenience." It is the exact same language for both the 2014 base model and the 2014 ES model.

The photographs in the "Gallery" also clearly show the 2014 base model equipped with a center stand.

I am going to order a base model 2014 and if it shows up without a center stand I am going to ask Yamaha to make it right.
 
Joined
Jan 24, 2014
Messages
111
Location
Bogotá Colombia South America
Re: Super Tenere 2014 faults and problems, early fixes for them. (also legacy problems from earlier

Since the 2014 model has a different set of handlebar clamps, the whole geometry of the upper triple clamps and handle bar clamps is still unknown for the accessories dealers. The good thing is that the handlebar risers and clamps are not forged in one piece with the triple clamps, son one can change bits and parts without having to change the whole triple clamps assembly, as it was a whole unit in the previous models.

For example, to install a steering damper I find 2 problems. The handlebar clamps are not set at 90 degree angle in relation to the triple clamp, they are offset some 30 degrees, so it's likely I will have to change those handlebar clamps for a 90 degree angle ....and it seems to me they are way to wide between the in relation with the fixed, forged clamps of the 2013 model.

This is the 2014:





And this is the previous model with the steering damper, from OTR:



I will send the measurements to OTR and see what they come up with.





Juan Valderrama
XT1200Z
Broadcasting from Bogotá - Colombia.
 
Joined
Jan 24, 2014
Messages
111
Location
Bogotá Colombia South America
Re: Super Tenere 2014 faults and problems, early fixes for them. (also legacy problems from earlier

The clutch switch is different than the V1. Nos it includes two micro switchs inside. One is for the clutch and the other seems to be for the cruise control.

BTW, I damaged both micro switchs while fidling with the clutch switch. I managed to repair it but I am not sure of the 2014 model will benefit from this hack.

More at:


http://www.yamahasupertenere.com/index.php?topic=4486.0
Instantly 15 more free HP




Juan Valderrama
XT1200Z
Broadcasting from Bogotá - Colombia.
 
Top