***SOLD*** Hepco-Becker sidecarrier rack kit, Rev-1

[bonzer2u]

Greetings,

Since I hung a LeoVince can on my s-10, had to upgrade to the rev-2 kit that works with aftermarket (long) cans. Therefor I have a lightly used rev-1 kit that will ONLY work with the stock exhaust system or cans of same dimention's 'if there are any???'

Price is $150 (cost $300) plus your choice of prepaide shipping from Oregon zip-code 97526.

I reused all shipping materials that came with the new kit and package measures 12" tall, 24" wide and 7" deep, weights 16 lbs total.

Thanks,

mj

 

[BHTENERE]

Re: Hepco-Becker sidecarrier rack kit, Rev-1

I am interested in the racks. Do the racks have quick release points to easily remove them from the bike?

 

[bonzer2u]

Re: Hepco-Becker sidecarrier rack kit, Rev-1

Yah, they have 3 - 1/4 turn quick disconnects on each side - takes a couple minutes, They are also symetrical from the back on spacing so you should use a pair of 30 or 40 litre cases on each side, I have a pair of 40l junior flash and they are evenly balanced but can be used with all HB cases. I do have some pics of this setup here:

http://www.yamahasupertenere.com/index.php?topic=4193.msg75257#msg75257

The only difference is the rear cross support brace, the rev-1 goes through the wheel well and the rev-2 wraps around the rear fender under the license plate, aka good for aftermarket pipes.

 

[DubbleJay]

Re: Hepco-Becker sidecarrier rack kit, Rev-1

I will take second in line if BHTENERe backs out.

 

[bonzer2u]

Re: Hepco-Becker sidecarrier rack kit, Rev-1

I will take second in line if BHTENERe backs out.

PM sent...

 

[bonzer2u]

Re: Hepco-Becker sidecarrier rack kit, Rev-1

Thanks DoubleJay,

Will be on there way to you soon.