MrVvrroomm
New Member
http://gpsforless.stores.yahoo.net/baseplatei.html
$60 shipped
I bought this for my '14 ES. Far superior to RAM mount on crossbar. I had Zumo 660 mounted with this.
below is copied/pasted for description
"Base Plate II" is compatible with following GPS mounts:
Street Pilot III/SP III Deluxe: Garmin P# 010-10304-00 (comes with GPS unit)
GPSMAP 176/176c, 196, 276c, 376c, 378, 478: Garmin P# 010-10257-00 or 010-10511-00(comes with GPS unit).
Street Pilot 26xx/27xx28xx series: Garmin P# 010 10495-00 (purchased separately)
Quest, Quest2: Garmin P# 010-10610-00 (purchased separately)
Garmin Zumo 220: Garmin P# 010-11143-07 (comes with GPS unit)
Garmin Zumo 550: Garmin P# 010-10859-00 (comes with GPS unit)
Garmin Zumo 590/595: Garmin P# 010-12110-00 (comes with GPS unit)
Garmin Zumo 660LM/665LM: Garmin P# 010-11270-03 (comes with GPS unit)
Garmin Montana 600/600t/610/610t/650/650t/680/680t: Garmin P# 010-11654-01 (purchased separately)
Garmin Monterra: Garmin P# 010-11654-01 (purchased separately)
RAM cradles: RAM Cradle with 1.9" (48mm) screw hole pattern (purchased directly from RAM)
Two separate clamps bolted to the back of the Base Plate I and II made to attach it to the 1/2 aluminum rod of GadgetGuy Bracket Kits. It is also possible to adapt it on the cross bar of dirt and enduro type bikes as well as ATVs. Required diameter of clamping surface is 0.5". Since the diameter of cross bar on different vehicles is different, the gap between the cross bar and the bracket clamps has to be filled with shims. Shim's stock is available in many hardware stores. It is also possible to substitute the shim stock with aluminum from can of soda. A set of 0.015" shims for installation on BMW crossbars is available in "GadgetGuy Components". For more details please click on "Tips on installation of Garmin components on Base Plate II" link below.
$60 shipped
I bought this for my '14 ES. Far superior to RAM mount on crossbar. I had Zumo 660 mounted with this.
below is copied/pasted for description
"Base Plate II" is compatible with following GPS mounts:
Street Pilot III/SP III Deluxe: Garmin P# 010-10304-00 (comes with GPS unit)
GPSMAP 176/176c, 196, 276c, 376c, 378, 478: Garmin P# 010-10257-00 or 010-10511-00(comes with GPS unit).
Street Pilot 26xx/27xx28xx series: Garmin P# 010 10495-00 (purchased separately)
Quest, Quest2: Garmin P# 010-10610-00 (purchased separately)
Garmin Zumo 220: Garmin P# 010-11143-07 (comes with GPS unit)
Garmin Zumo 550: Garmin P# 010-10859-00 (comes with GPS unit)
Garmin Zumo 590/595: Garmin P# 010-12110-00 (comes with GPS unit)
Garmin Zumo 660LM/665LM: Garmin P# 010-11270-03 (comes with GPS unit)
Garmin Montana 600/600t/610/610t/650/650t/680/680t: Garmin P# 010-11654-01 (purchased separately)
Garmin Monterra: Garmin P# 010-11654-01 (purchased separately)
RAM cradles: RAM Cradle with 1.9" (48mm) screw hole pattern (purchased directly from RAM)
Two separate clamps bolted to the back of the Base Plate I and II made to attach it to the 1/2 aluminum rod of GadgetGuy Bracket Kits. It is also possible to adapt it on the cross bar of dirt and enduro type bikes as well as ATVs. Required diameter of clamping surface is 0.5". Since the diameter of cross bar on different vehicles is different, the gap between the cross bar and the bracket clamps has to be filled with shims. Shim's stock is available in many hardware stores. It is also possible to substitute the shim stock with aluminum from can of soda. A set of 0.015" shims for installation on BMW crossbars is available in "GadgetGuy Components". For more details please click on "Tips on installation of Garmin components on Base Plate II" link below.
