SkunkWorks
Well-Known Member
I'm selling my COMPLETE Arrow exhaust system
This will include the Stainless-Steel Headers as well as the Aluminum slip-on Muffler.
Willing to separate if somebody only wants the Headers, or the Muffler by itself.
The headers I purchased new. I used them for 2 seasons and just removed them from the bike a couple weekends ago. They cleaned up nice and will ship in the original manufacturer's Box.
I'm also including a pair of new exhaust gaskets, so you can just install them and go!
The Muffler I purchased used from another forum member. I installed it on the bike and ran it for a couple rides. I tried it both with and without the included DB-killer insert, and found it to be just a bit too loud for long-distance touring use, so I removed it and stored it in my shed ever since.
I purchased a stainless-steel and ceramic muffler re-pack kit, and just today disassembled it and re-packed it with fresh material.
Whomever ends up with it will get a freshly packed Muffler.
I'm assuming it will be a tad bit quieter since the fiberglass packing that I pulled out was burned-away around the inside core.
These should fit all years of Super-Tenere 1200, and either half will work with the factory exhaust if you decide to only install half the system.
I had them installed on a 2014 model.
I'm asking $500.00 plus whatever shipping will cost to your address.
I'm guessing due to the size of the boxes, it will cost somewhere around $80-$100 to ship to most address in the USA, so keep that in mind.
OR $300.00 plus shipping for the Headers.
$200.00 plus shipping for the Muffler.
I will also do local pick-up without shipping if someone wants to meet me in the Denver area.
Stainless-Steel de-cat Headers, includes all the springs, hardware, and new gaskets
Muffler (disassembled for re-packing)
Stainless-steel Wool and Ceramic re-pack kit
Core wrapped and ready for reassembly
DB-killer Insert is held in with a snap-ring, and is easily removed if you like it louder.
All assembled and ready for shipping and installation.
This will include the Stainless-Steel Headers as well as the Aluminum slip-on Muffler.
Willing to separate if somebody only wants the Headers, or the Muffler by itself.
The headers I purchased new. I used them for 2 seasons and just removed them from the bike a couple weekends ago. They cleaned up nice and will ship in the original manufacturer's Box.
I'm also including a pair of new exhaust gaskets, so you can just install them and go!
The Muffler I purchased used from another forum member. I installed it on the bike and ran it for a couple rides. I tried it both with and without the included DB-killer insert, and found it to be just a bit too loud for long-distance touring use, so I removed it and stored it in my shed ever since.
I purchased a stainless-steel and ceramic muffler re-pack kit, and just today disassembled it and re-packed it with fresh material.
Whomever ends up with it will get a freshly packed Muffler.
I'm assuming it will be a tad bit quieter since the fiberglass packing that I pulled out was burned-away around the inside core.
These should fit all years of Super-Tenere 1200, and either half will work with the factory exhaust if you decide to only install half the system.
I had them installed on a 2014 model.
I'm asking $500.00 plus whatever shipping will cost to your address.
I'm guessing due to the size of the boxes, it will cost somewhere around $80-$100 to ship to most address in the USA, so keep that in mind.
OR $300.00 plus shipping for the Headers.
$200.00 plus shipping for the Muffler.
I will also do local pick-up without shipping if someone wants to meet me in the Denver area.
Stainless-Steel de-cat Headers, includes all the springs, hardware, and new gaskets
Muffler (disassembled for re-packing)
Stainless-steel Wool and Ceramic re-pack kit
Core wrapped and ready for reassembly
DB-killer Insert is held in with a snap-ring, and is easily removed if you like it louder.
All assembled and ready for shipping and installation.
Last edited:
