Seat Concepts Seat (front) FS SOLD

[bendrichard]

installed and rode for one ride. Found out I prefer the OEM for some reason.
This is the embossed top with vinyl sides.
http://www.seatconcepts.com/products#!/Yamaha-Super-Tenere-1200-2010-15/p/15531733/category=1671359

$90 plus shipping

 

[Kwatters]

Re: Seat Concepts Seat (front) FS

is this the seat ready to go or just the kit to install on my pan?

 

[bendrichard]

Re: Seat Concepts Seat (front) FS

Just the kit

 

[fire fox]

Re: Seat Concepts Seat (front) FS

PM Sent


Sent from my iPhone using Tapatalk

 

[TimLaw]

Re: Seat Concepts Seat (front) FS

What is the difference between the stock seat?

 

[Checkswrecks]

Re: Seat Concepts Seat (front) FS

What is the difference between the stock seat?

The Seat Concepts front seat is slighter wider and flatter front to rear, plus is about an inch higher in front. Foam seems slightly harder, but when ordering you can ask for the softer foam. Rear seat is just a new cover to match the front.

 

[Ramseybella]

Re: Seat Concepts Seat (front) FS

So what your saying is you installed it to your OEM seat pan took it out for one ride and took it off and reinstalled the OEM pad and cover back on?
It is a harder seat I have one it takes time to get acquainted with it.
If your a light weight person the OEM is fine.
It's much more forgiving than say a Corbin brick seat.

 

[TXTenere]

Re: Seat Concepts Seat (front) FS

So what your saying is you installed it to your OEM seat pan took it out for one ride and took it off and reinstalled the OEM pad and cover back on?
It is a harder seat I have one it takes time to get acquainted with it.
If your a light weight person the OEM is fine.
It's much more forgiving than say a Corbin brick seat.

I do agree with what is quoted above. After my SC mod, I was instantly happier with the seat. However, it did take 1,000 miles or so for me to become accustomed to the seat, and have it become a significant improvement.

 

[bendrichard]

Re: Seat Concepts Seat (front) FS

So what your saying is you installed it to your OEM seat pan took it out for one ride and took it off and reinstalled the OEM pad and cover back on?
It is a harder seat I have one it takes time to get acquainted with it.
If your a light weight person the OEM is fine.
It's much more forgiving than say a Corbin brick seat.

That's what I did.
Leaving on a 6 month trip in a few days and couldn't take the chance that the seat would not work. Yes, Iam a light weight
Richard

 

[fire fox]

Re: Seat Concepts Seat (front) FS

Funds sent via PayPal.