BaileyRam
Member
I've got a 2016 / Gen 2 S10. I went to check / adjust the preload and the option wasn't on the menu. It just cycles back and forth from the info display to the rebound setting (i.e. hard, std, soft) display. (I'm also not getting the grip warmer page, and I think I have some ECU codes too, but those are questions for another post).
I got the following SCU codes:
61-89:
61 = Malfunction History Display
89 = Malfunction code
(I understand it will cycle through all the codes every 2 seconds if there are multiple) I'm only getting 89
I can't find what code 89 is? I'm not getting the preload error light on the dash showing up, so I'm a bit confused.
Any ideas?
Thanks!
I got the following SCU codes:
61-89:
61 = Malfunction History Display
89 = Malfunction code
(I understand it will cycle through all the codes every 2 seconds if there are multiple) I'm only getting 89
I can't find what code 89 is? I'm not getting the preload error light on the dash showing up, so I'm a bit confused.
Any ideas?
Thanks!