Hendrixwannnabe1
Member
So my valve clearance adjustment continues on.
Wanted to show how i reset the CCT as it was a PITA till i worked it out.
Might help someone else if they struggling.
Ended up placing body in a vice and then used a socket on an extenstion with the finger from a rubber glove for grip.
Key was to only use light pressure to begin with so it threads down instead of just spinning the internal screw inside the CCT.
Apply more pressure as you get lower.
My circlip wouldnt set itself so i used a small screwdriver to turn the upper clip to lock it in.
Cheers.
Dave.
Sent from my LG-H930 using Tapatalk
Wanted to show how i reset the CCT as it was a PITA till i worked it out.
Might help someone else if they struggling.
Ended up placing body in a vice and then used a socket on an extenstion with the finger from a rubber glove for grip.
Key was to only use light pressure to begin with so it threads down instead of just spinning the internal screw inside the CCT.
Apply more pressure as you get lower.
My circlip wouldnt set itself so i used a small screwdriver to turn the upper clip to lock it in.
Cheers.
Dave.
Sent from my LG-H930 using Tapatalk