PSR Magnetic Oil Drain Bolt Yamaha

[bignick1972]

Hi guys
I m trying to cut the motorcycle cost , so i decided to change oil.
I got synthetic 15/50 , new K&N oil filter and PSR Magnetic Oil Drain Bolt.
This bolt has a metal wire and a clip . Is this necessary ? and why the original does not have it ?
Thanks

 

[JRE]

That is a safety wire to ensure the bolt does not loosen enough to spill oil. IIRC, it's not required to be used unless you are on a track I believe. I'm pretty sure most if not all tracks require this because it can be a hazard to other riders. I would certainly use it for the extra peace of mind. Where did you get it and what part #?

 

[bignick1972]

ok i got it .
I m not feel secure knowing that this bolt can eventually coming off . i just got a torque wrench to be sure.
i got this bolt @ revzilla.com
Thanks again

 

[bignick1972]

That is a safety wire to ensure the bolt does not loosen enough to spill oil. IIRC, it's not required to be used unless you are on a track I believe. I'm pretty sure most if not all tracks require this because it can be a hazard to other riders. I would certainly use it for the extra peace of mind. Where did you get it and what part #?

Part number ITEM# 950490
Should i get 2 of those ?
i just realize that there are 2 drain bolt .
Thanks

 

[Kwatters]

Part number ITEM# 950490
Should i get 2 of those ?
i just realize that there are 2 drain bolt .
Thanks

Sure that is correct? Not doubting you but Revzilla says it doesn't match the Tenere.

 

[bignick1972]

Sure that is correct? Not doubting you but Revzilla says it doesn't match the Tenere.

i double check . Revzilla give me the option of choosing my Ride . Looks like it s fitting .( i really hope )
Thanks
Nick

 

[Kwatters]

OK thanks. I forgot many places still don't show whether it works on a 2014 or 2015. It doesn't come up if you start with 2014.

 

[bignick1972]

i wish i will own a 2014 one ....

 

[bignick1972]

Sure that is correct? Not doubting you but Revzilla says it doesn't match the Tenere.

you were right . bolt don't fit.
I had to use the original ones .

 

[tomatocity]

you were right . bolt don't fit.
I had to use the original ones .

What part of 'don't fit' is it?

- Diameter
- Threads
- Length

 

[bignick1972]

What part of 'don't fit' is it?

- Diameter
- Threads
- Length

Diameter .

 

[bignick1972]

Maybe i should use this http://goldplug.com/shop/mp01/

Can i swap 2 of these with the original without changing oil . and adding the oil that is coming out during the swap ?
i do not want to wait until another oil change .
Thanks
Nick