power commander v for 2010 S10

[Drew]

Hi all,
I am looking at ordering a power commander V but every website I look at dont have them listed for 2010 models, only 2011-13. Does anyone know if they will work with my 2010 model xt1200z?
Thanks, drew

 

[triman11427]

Reach out to Tobasco, he'll know.

 

[~TABASCO~]

Hi all,
I am looking at ordering a power commander V but every website I look at dont have them listed for 2010 models, only 2011-13. Does anyone know if they will work with my 2010 model xt1200z?
Thanks, drew

Yes, as far as I know the PCV will work on all Tenere 1200's..... Then you will need a map... if you get a PCV I would recommend you get the Auto Tune as well... Then you can build your own and change it if need be... .

 

[Drew]

Thanks for your help. I am intending to have the PC V installed at a local shop with dyno, as I dont know what I'm doing really. If they are setting it all up with dyno and tuning, is the auto tune still necessary?
The only other mods my S10 has so far is yoshimura rs4 pipe and clutch switch mod.

 

[Karson]

Thanks for your help. I am intending to have the PC V installed at a local shop with dyno, as I dont know what I'm doing really. If they are setting it all up with dyno and tuning, is the auto tune still necessary?
The only other mods my S10 has so far is yoshimura rs4 pipe and clutch switch mod.

Autotune isn't really necessary, but nice if you ever plan on bolting on more mods down the road. Good call on taking it to a shop if you're not comfortable with adjusting the PCV yourself. If you've never worked with the interface, it has a learning curve to understand what's all going on.

 

[pqsqac]

I wish Cobra made this for the XT, no maps, dyno or O2 adjustments required.

http://www.cobrausa.com/fuel_detail.php?model_id=88&make_id=4&product_id=3005&make=&model=C50&product=Fi2000%20PowrPro%20Tuner

I just sent them an email on availability.

 

[fredz43]

I wish Cobra made this for the XT, no maps, dyno or O2 adjustments required.

http://www.cobrausa.com/fuel_detail.php?model_id=88&make_id=4&product_id=3005&make=&model=C50&product=Fi2000%20PowrPro%20Tuner

I just sent them an email on availability.

Vince, I recommend that you consider the EC Unleashed Gen 2 flash for about $150 less than that. No maps, dyno, or O2 adjustments and it makes the bike run great. My only mods are Akra pipe, sync the TB's at 3/4 turn reference and now the Gen 2 flash and I couldn't be happier. The Gen 1 was a nice improvement, but the Gen 2 is a much better improvement. Only problem I have is that I can't restrain myself from rolling on the throttle just to feel the pull. ;D