OEM pannier corner repair

[user500r]

I caught the top corner of the right pannier on a post and was wondering if anyone has repaired/replaced just that piece? there is a plastic housing that holds a nut and a bolt that that secures it from the underside of the lid. I looked for just the plastic piece but cannot find a part number for that. I could by a whole new lid but that is expensive and I would have to figure out how to take the hinge apart or disassemble it for the peice that I need. I could buy a whole new case but even more expensive.

Has any repaired this and or does anyone have a broken case and would want to sell the little plastic piece?

As far as repairing. I tried using some silicone but the wind still got under the aluminum sheet on the lid and it would not stay. My next idea is glue some wood or something inside the corner and use a wood screw but that seems pretty lame.

 

[bimota]

a good glue will do that something like ARALDITE

10g x Araldite Epoxy Klear Glue 2 Part With Resin & Hardener 5 Minute setting 8904095916951 | eBay

Araldite Klear Eposy Adhesive Glue 2 Part With Resin & Hardener. - Araldite joints are water proof, heat proof, stress proof and resistant to most chemicals. Non corrosive and non-toxic. - The water white adhesive has a clear glue line that takes five minutes to bond two surfaces together.

www.ebay.co.uk

ROB

 

[SkunkWorks]

I have a broken case that I kept for spare parts.
I can send you that corner-piece.
PM me with your address, and I'll mail it to you..........No-charge.
Just a "pay it forward" thing.

It may take me a couple days to dig it out of my Shed though.

Alan

 

[user500r]

I have a broken case that I kept for spare parts.
I can send you that corner-piece.
PM me with your address, and I'll mail it to you..........No-charge.
Just a "pay it forward" thing.

It may take me a couple days to dig it out of my Shed though.

Alan

Thanks so much! DM incoming

 

[Sierra1]

a good glue will do that something like ARALDITE . . . .

And/or a small screw w/predrill. Belt/suspender kinda thing. Appears to be a strong enough structure for some hardware.

 

[Matt51F1]

Something that is fantastic for repairing plastic bits and fairings lugs is Plastex. Works well!
You could buy up the corner piece with the lug back in there and fit as it’s supposed to.

 

[SkunkWorks]

Sorry it took me awhile to get up in the Loft of my Shed. My old Pannier was buried way in the back.

I have the Corner-Piece that you need.
I'll mail it out to you tomorrow.

 

[user500r]

Sorry it took me awhile to get up in the Loft of my Shed. My old Pannier was buried way in the back.

I have the Corner-Piece that you need.
I'll mail it out to you tomorrow.

View attachment 103599

View attachment 103600

That is exactly the piece I need, Thanks so much!

 

[AusTexS10]

Sorry it took me awhile to get up in the Loft of my Shed. My old Pannier was buried way in the back.

I have the Corner-Piece that you need.
I'll mail it out to you tomorrow.

Lots of good people on here, always willing to help someone in need. We could use more of that in the world.

 

[SkunkWorks]

I mailed it out to you on my lunch-break today.
You should have it in a few days.

Alan H.

 

[Jlq1969]

Weld plastic pieces with zip ties and a soldering iron for electronic circuits…..there is many videos in youtube

 

[user500r]

I mailed it out to you on my lunch-break today.
You should have it in a few days.

Alan H.

I just got it a few minutes ago. Good as new! Thanks so much

 

[Paul466]

I just got it a few minutes ago. Good as new! Thanks so much

Alan is a gentleman , going riding with him tomorrow

 

[SkunkWorks]

Glad I could help!

 

[louis verville]

I have a broken case that I kept for spare parts.
I can send you that corner-piece.
PM me with your address, and I'll mail it to you..........No-charge.
Just a "pay it forward" thing.

It may take me a couple days to dig it out of my Shed though.

Alan

Do you have the left side case brackets that is installed on the frame kit of the motocycle ?

here some pics of my right side bracket , i need the left side …

 

[SkunkWorks]

Do you have the left side case brackets that is installed on the frame kit of the motocycle ?

here some pics of my right side bracket , i need the left side …

NO, that part of the Box had broken off on mine.
I still have most of the box, but it is in fact broken where it mounts to the frame-rack.

 

[louis verville]

NO, that part of the Box had broken off on mine.
I still have most of the box, but it is in fact broken where it mounts to the frame-rack.

thank you for answering. Like mine it did brake at the place. By any chance the right sidejs it good ? I may sweep these 2 parts for each other !

 

[SkunkWorks]

Not sure if that bracket piece is interchangeable from left or right?
If it is, that would open up your search to either side box!

Unfortunately I only have the one spare broken box.
I sold my complete OEM set some time ago, and went with a full Bumot aftermarket setup.