2014Tenere
Member
great follow up / reply to my question - Thanks
I am have been considering adding one of these and not just for pre-flight. A fellow Super Tenere rider friend had a serious accident in November while riding 2 up. He got a screw in the rear tire and before becoming aware of the tire losing air, it came off the bead and they went down at highway speed, resulting in injuries to both, with his wife sustaining serious injury. Two weeks ago another close friend was riding with a group and on a straight section of road, they noticed his bike weaving badly and he ran off the road and went down hard. They air lifted him to St Louis, but he never recovered and passed away this morning. A check of his totalled bike showed 10 psi of air in the rear tire.Checkswrecks said:You could also install a simple switch on the power wire and just check the TPMS when "pre-flighting" the bike, which would turn the screen off when riding.
fredz43 said:I am have been considering adding one of these and not just for pre-flight. A fellow Super Tenere rider friend had a serious accident in November while riding 2 up. He got a screw in the rear tire and before becoming aware of the tire losing air, it came off the bead and they went down at highway speed, resulting in injuries to both, with his wife sustaining serious injury. Two weeks ago another close friend was riding with a group and on a straight section of road, they noticed his bike weaving badly and he ran off the road and went down hard. They air lifted him to St Louis, but he never recovered and passed away this morning. A check of his totalled bike showed 10 psi of air in the rear tire.
I'm sure that there may be instances of rapid deflation when you might not have time to react, but OTOH, there surely could be instances when the display going red would alert you in time to avoid such tragic consequences.
I made up my mind this morning to place my order.
Hmmm, OK, I'll try again. Thanks.Ilbikes said:Jeff, just release the FUNction key and it will return to the last Mode used after 3 or 4 seconds.
Gordon, if you're still needing someone to do and install documentation I'll be happy to help you out.Ilbikes said:Guys, I need a couple Tenere owners to install my TPM Systems. I need step by step install photos, comments, and an evaluation of the product, then it's performance.
I'll provide a discounted price on the TPMS or give you "store credit" for tools - which ever you prefer. I think you'll love the system, but I need to get a Tenere or two up on my site. If these don't meet expectations, me and everyone here need to know. I've used the older M202 system for 4 years and until my front tire's sensor battery died. I now have the M203 and like it even more with the added features and longer battery life. The fact that I'm the Authorized US dealer for these and will sell and replace your sender/sensors due to tire changer, crash, or other damage and be your warranty service dealer - Priceless!
Here is the one we did on a friend's Gold Wing -
http://www.rrrtoolsolutions.com/articles/honda-gold-wing-tpms-tire-pressure-monitoring-system-installation/
And my ST1300 here -
http://www.rrrtoolsolutions.com/articles/motorcycle-tpms-tire-pressure-monitor-system/
Thanks, Gordon
I see them on the site.WJBertrand said:Old thread I know, but Gordon are you still about? Need some replacement sensors but don't see how to order just the sensors at your site. Front one is flashing 2.6V. Only got two years out of it, expected 3.
Thanks! I looked all over his site and never found that page!Blind Squirrel said:I see them on the site.
http://www.mcssl.com/store/rrr-tool-solutions
About 1/2 - 2/3 of the way down.