lower rear brake petal

[bobbar]

Anyone lower the rear brake petal? I've lowered the pegs and need to get the brake down. Looks like there is only about 1/4" of play available on the threaded adjuster on the slave cylinder.

 

[Don in Lodi]

Anyone lower the rear brake petal? I've lowered the pegs and need to get the brake down. Looks like there is only about 1/4" of play available on the threaded adjuster on the slave cylinder.

When I had the lowered pegs, don't any more, I had to hacksaw off a bit of that adjuster. The rod ran into the cross pin before making enough adjustment.

 

[bobbar]

Thx. I was afraid that was what I would have to do.

 

[2112]

I had to carefully cut the threaded bar when I fitted my SW Motech pegs. It's easy enough to do, just go steady and remember to leave the nut on the thread so it'll clean the thread up when you remove it. Best of luck ::008::