Jaxon's extended hydraulic hoses

[nchristi]

Can someone point to me how to order "Jaxon's extended hydraulic hoses"? I called Ride On ADV, but no response yet. Is there a way to order online?
Keep da shiny side up!

Nick

 

[NittanyXT]

Give Jaxon some time, he's a busy guy!

 

[Jerry]

I think he is out of town for a few days, I am sure he will return the calls when he gets back.

 

[Andrew]

I have a set on order, and yes, he's a busy man! He's already built me one of his bash plates, and I'll probably ride up in mid-August (when it's nice n cool, of course) and pick 'em up at the shop ... hell, it's only 340 miles! Best of luck
AT

 

[nchristi]

How does he take this orders, only by phone and in person? No internet/online ordering?

 

[Dingo]

Email Jaxon ... jaxon@wildcardcustoms.com

Ive coordinated all my purchases with Jaxon through email and Paypal ... zero hiccups, highly recommended. ::008::

 

[Combo]

Why in the world do we need longer hoses? Yamaha mistake? Recall time for hoses? Call your state safety representive and report these things for sure. I'm glad mine came with correct length hoses. Scary thinking about the possibility of too short hoses and they may pull out of the master cylinder then no brakes!

;D


They get shorter with time. Kind of like my arms..........I can't see a thing now. I never use the front brake.........scares the hell out of me. ::025::

 

[nchristi]

Oh, I installed the ROX Pivoting Handlebar 2" Riser; the hydraulic hoses are ok b/w 10 & 2 o'clock position; but out stretched to lock position they now get pinched against triple tree. Jaxon has 2.5"inch extension kit for these hoses...

 

[jajpko]

Oh, I installed the ROX Pivoting Handlebar 2" Riser; the hydraulic hoses are ok b/w 10 & 2 o'clock position; but out stretched to lock position they now get pinched against triple tree. Jaxon has 2.5"inch extension kit for these hoses...

You need to understand RonH. He does not believe in after market parts, at all. If it did not come with the bike, you don't need it.. ::025::

 

[~TABASCO~]

I'm back in town. Feel free to PM me your number. I'll be happy to call you and take care of ya. Thanks Jaxon

 

[Toyamaha]

Oh, I installed the ROX Pivoting Handlebar 2" Riser; the hydraulic hoses are ok b/w 10 & 2 o'clock position; but out stretched to lock position they now get pinched against triple tree. Jaxon has 2.5"inch extension kit for these hoses...

Is it just an 2.5 inch extention from my understanding or you need to replace the full hose. Can you send me any picture of what it look like.
Thanks Toyamaha.

 

[nchristi]

Toyamaha you will replace the section of hose from reservoir to coupling under the triple tree. You will see it, just follow both clutch and break line and you will find the connection point below triple tree on downtues. If you do decide to run'em do call Jaxon, he is very helpful in walking through the procedure. No bleeding required. as far a photo The long lines looks just like stock lines, just 2.5' longer to accommodate the riser. HTH.