Inflating tires....iis it just me?

[Maxified]

http://www.amazon.com/gp/product/B000FIAVKG/ref=pd_lpo_sbs_dp_ss_2?pf_rd_p=1944687682&pf_rd_s=lpo-top-stripe-1&pf_rd_t=201&pf_rd_i=B002L9J0VI&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=0ZV4X3WWVRJ9S33FW63F

The 90º angle part still swivels 360º when attached & that's handy. Good to have so many options folks are sharing.

 

[OldRider]

These work great too. Put on to air up tire, not to be left on when riding.

http://www.ebay.com/itm/PAIR-MOTORCYCLE-MOTORBIKE-TYRE-VALVE-EXTENSION-ADAPTOR-90-DEGREE-ANGLE-CAR-BIKE-/191293650469?hash=item2c89fd7625&vxp=mtr

 

[racer1735]

I have one of these attached to the end of the air hose from my compressor. The ball chuck simply attaches to the swivel.

 

[Cycledude]

This is what I did to solve the issue
http://www.ebay.com/itm/141545376006?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

 

[dietDrThunder]

I install steel 90 degree stems in every bike I ever own; it's so much easier in general, plus they'll work with pretty much any fill fitting in case you get stuck w/o your normal method of filling. The Tenere is about to get the ones linked below. Note: don't buy the lower profile machined aluminum ones, as they won't fit the wheels (don't ask how I know).

http://www.amazon.com/VTR-VS-8-90-Metal-Valve-Degree/dp/B017S2EYWC/ref=sr_1_4?s=automotive&ie=UTF8&qid=1463465940&sr=1-4&keywords=90+degree+valve+stem

 

[Rodge]

Installing this at my next tires change...
http://www.motodracing.com/angled-valve-stems

 

[Davesax36]

Installing this at my next tires change...
http://www.motodracing.com/angled-valve-stems

Will those clear the lip?

 

[Rodge]

Will those clear the lip?

Good point, need to double check that...

 

[Don in Lodi]

Will those clear the lip?

::026::

 

[dietDrThunder]

Installing this at my next tires change...
http://www.motodracing.com/angled-valve-stems

Those are the ones I mentioned in my post; they won't fit the stock wheels.