Help Identifying

NHTenereRider

New Member
Joined
Jun 5, 2023
Messages
14
Location
New Hampshire
Hello there!

Looking at this 2018 ES at a distant dealer, but I cannot identify the luggage rack. I believe the top case rack is SW Motech? Trying to figure out what I'd need to make my Givi Trekker set fit.

Also, second picture is what appears to be the MadStad screen set up. Can you, the pros, tell if this is the 20" or 22" screen size? I'd prefer to look over versus through.

Thanks!
 

Attachments

bimota

Moderator
Staff member
Global Moderator
Joined
Dec 10, 2017
Messages
6,756
Location
bridgend, Wales, UK
the first picture of the blue bike that pannier rack is sw motech same as the top box rack you would need to remove it and buy givi trekker rack to fit your trekker panniers

rob
 

bimota

Moderator
Staff member
Global Moderator
Joined
Dec 10, 2017
Messages
6,756
Location
bridgend, Wales, UK
if you look at the pannier frame as well all the holes on it are visible so he has removed the little mounts for the panniers , he must of had soft luggage fitted to it in the end

rob
 

NHTenereRider

New Member
Joined
Jun 5, 2023
Messages
14
Location
New Hampshire

audiowize

Active Member
Joined
Sep 29, 2022
Messages
222
Location
Seattle
Somewhat humorously, those racks don't have the Trax hardware on them either.

I had Trax boxes on my Stelvio and I found that the metal plate in the back that the latch pulls against would bend over time and lead to the case rattling around while riding, which drove me nuts. The Givi mounting sometimes likes a bit of a rubber pad added where the lower sliding mounting points go if there's a little slop, but that's much easier to deal with than a rattling clasp.

The Givi system allows for a far wider variety of products to be attached. While I did run Dolomiti cases for a while on the Stelvio, I now have Canyon soft bags mounted on there instead.
 
Top