For the garage, I use a plain wheel stand that connects at the bottom of the forks. Those are all over ebay for reasonable prices. Ditto for the more complex triple tree stand that allows you to remove fork legs and keep the bike in the air. For that work I use the scissor jack under the Rumbux bash frame, as someone else mentioned. Be careful if doing it with the oem sump unguarded, and as was mentioned earlier, don't lift more than to the point where the rear wheel touches the floor. Or, pull the rear wheel first, then do the front if you're removing both wheels at the same time.
For travel, I just made up a small bar to prop under the Rumbux bash frame cross bar. A 2x2 piece of wood would also work. It's not taking a lot of weight, just keeping it balanced on the center stand. I prefer not to pull both wheels w/o using the wheel/fork stand in front, but sometimes you gotta do what you gotta do.