EB PC 8 and shopping list

[triman11427]

I've used the PC 8 on my Wee and want to install another on my S10. There are so many choices on his site I'm not sure which way to go. My plan is to install heated grips, an additional 12V socket, battery tender, Denali 2 lights, heated clothing, GIVI topbox with Admore lights. Any suggestions on the supplies I should order would be appreciated. I'm certainly going over his minimum but I don't want to leave something out only to have to order from the site again. This order should include posi connectors and the male plugs for the aux light connector. I guess I'm looking for a shopping list. Thanks

 

[tomatocity]

I just did a search for PC8 http://www.yamahasupertenere.com/index.php?action=search2 and there is more information in this search I could list.

Battery Tender can be installed directly to your battery.

I am interested in Where and How you install the PC-8 since I might be installing one very soon.

Contact James at Eastern Beaver. He is very helpful.

 

[XplorerMoto]

Here ya go: http://www.yamahasupertenere.com/index.php?topic=4945.0

 

[Bigbore4]

I've used the PC 8 on my Wee and want to install another on my S10. There are so many choices on his site I'm not sure which way to go. My plan is to install heated grips, an additional 12V socket, battery tender, Denali 2 lights, heated clothing, GIVI topbox with Admore lights. Any suggestions on the supplies I should order would be appreciated. I'm certainly going over his minimum but I don't want to leave something out only to have to order from the site again. This order should include posi connectors and the male plugs for the aux light connector. I guess I'm looking for a shopping list. Thanks

I have a set of Denali 1's available. Brackets, harness built (solder and heat shrink), ready to install. If interested PM me.

 

[JonnyCinco]

looking at doing the same soon. as noted in my ? for heated gear thread, seems most go directly to the battery for the heated gear. I go direct to battery for the battery tender, and I thought the Admore lights plug into the rear wiring harness. the heated grips have their own plug already installed.

So really, you are looking at the additional 12v, and denali's.

 

[triman11427]

I can use the same connector for my heated gear and battery tender. I will use the pc8 for the heated grips, Denali lights and whatever else I add in the future.