eastern beaver 3CS for Yamaha XT1200Z S10

[rtwpaul]

eastern beaver 3CS for Yamaha XT1200Z S10

this was on my bike when i bought it, i traded up to the bigger unit so this came off after around 1000 miles...it is missing one connector shown in second photo, so you will need to source one from a parts store

this is the plug version that is keyed power to the stock Yamaha plug that is on your bike from the factory...the white plug

$50 w/ free shipping - paypal friends and family

 

[zphenyl]

Is this the 3 switched or 2 switched and one unswitched (always on) version?

 

[rtwpaul]

its the one image shown on this page, exactly the same - http://www.easternbeaver.com/Main/Bike_Specific/Yamaha/yamaha.html

when you follow the link that image isn't there, all i can tell you is it plugs directly into the wiring system and has/ had power...i never used it and took it off the bike 16,000 miles ago...if i were to guess i would say one unswitched as one lead goes to a different connector on the relay than the other two wires...its sealed so i don't want to take it apart

 

[Ramseybella]

I have one of these on my bike use it for heated gear split gloves and vest on one line.
Plan on linking my lights to the other switched circuit and another charger on the unswitched for charging stuff without turning the bike on.
Like phone overnight while camping.