Good afternoon from Spain,
So sorry about my english ::010::
A few days ago installed a Nitron Adv. R2 with preload knob. The shock came from the factory without the lower bolt. I thought it served the origin bolt but not, you need at least another bolt of 70mm (I refer to the main bolt of the bottom mount).
I'm currently waiting for the bolt, Nitron is sending me because it was his mistake.
While, I have made my own 70mm bolt, but do not dare to move the bike because I observe one thing:
The damper in its lower part has a small lateral movement, this occurs in the buffer stock and the Nitron. The bottom bracket is perfectly screwed
This leads me two questions:
- Is normal that lateral movement damper on the bottom?
- Will there be contact between the new bolt and the linkage pin bones if amortiguaor sideways move?
Thanks in advance!!!
So sorry about my english ::010::
A few days ago installed a Nitron Adv. R2 with preload knob. The shock came from the factory without the lower bolt. I thought it served the origin bolt but not, you need at least another bolt of 70mm (I refer to the main bolt of the bottom mount).
I'm currently waiting for the bolt, Nitron is sending me because it was his mistake.
While, I have made my own 70mm bolt, but do not dare to move the bike because I observe one thing:
The damper in its lower part has a small lateral movement, this occurs in the buffer stock and the Nitron. The bottom bracket is perfectly screwed
This leads me two questions:
- Is normal that lateral movement damper on the bottom?
- Will there be contact between the new bolt and the linkage pin bones if amortiguaor sideways move?
Thanks in advance!!!