so the gap between the 2 furthest holes should be 327mm whitch is about 12 and 3/4 inches but the template we printed is showing 15 inches betweeb holes is that right
rob
so the gap between the 2 furthest holes should be 327mm whitch is about 12 and 3/4 inches but the template we printed is showing 15 inches betweeb holes is that right
don,t worry yourself over it it,ll get sorted it was nice enough for you to do this for us the plastic is only £12 nobody has cut it yetYeah. Something is wrong and I'm sorry about it. I hope no one has cut the plastic sheet yet...
Glad to hear that!I took my usb to a local Staples and printed it on a A3 or 11x17 inch paper. Then purchased a cheap black rubber trash bucket from Home Depot and used that. Works great! Thanks Jiivee!
It’s the least I can do, thanks for all you’ve doneHi guys. The company that made me the file was not open today...
So, I went to the workplace to learn how to use the scanner and I think I succeeded in that! I now have a new pdf file and I also tested printing by choosing A3 size, and the template size is real 1:1. However, it is good to check the fit before cutting the plastic sheet.
I don't know how to attach the file here, but if 'Mr. Saint rob' could do it one more time it would be easier for me...?
The small holes in the template are 5mm, and the big one is 8mm.
View attachment 104994
View attachment 104995
Yep, it's too small now. I think the problem is in the printer settings? When you have selected an A3 sheet from the printer, make sure before printing that the "actual size" or "real size" is also selected. That setting should be found in the printer settings.i got the new one printed
its showing 342mm long, and 318mm hole to hole, as your first picture shows it to be 353mm and 327mm does this mean this one is wrong to
rob
Thanks, that would be very kind of you.OP I cant thank you enough for this as its something that I have contemplated in the past. I will test things out and post my results.
Im half inclined on the computer (as i should be working in IT) so maybe I can help out getting a PDF thats an easy consistent print for everyone.
They worked out great, thank you again for posting it. I did a set for my friends S10 too, so getting the hang of making them nowGlad to hear that some of you have done these and that they have been useful as well.