Crush Washers

[avc8130]

Anyone have the dimensions for the crush washers used on the oil drains and the final drive?

ac

 

[Karson]

I ordered extra from here - http://www.magneticdrainplug.com/Motorcycle_Drain_Plugs/MP01.html#.T2ywshE7XLg 12mm is the only dimensions the site gives...sorry if that's no help.

 

[EricV]

Anyone have the dimensions for the crush washers used on the oil drains and the final drive?

ac

12mm for the oil drain plugs, 14 mm for the final drive. I just picked up some copper ones from the local auto parts store. Aluminum works fine too. These are more to prevent damage from over tightening than to create an actual seal, but serve both purposes.

 

[Motowalt]

The copper ones are identical to the ones used by Polaris and are less expensive also.