Cruise Control / Back Brake

[Ricsta]

Being a tall rider I need my back brake pedal lower, but when I do this Cruise Control doesn’t work,… which I need as suffer with Arthritis. There’s obviously a Sensor or something that doesn’t automatically adjust itself. I’m no mechanic so need a little help. thanks

 

[Squibb]

Simply adjust the actuation point for the brake light switch, behind the RH side heel plate (2 hex socket screws).

When you have a moment, could you provide us with an introduction, so we know a little about where you are from, the year/model of your Super10 & maybe a few words about your biking history - thanks.

 

[Peculierboy]

There is a switch behind the heel plate/guard. It does double duty for the brake light switch and cruise activation sensor. It will have a small spring connecting it to the brake pedal. You can see the adjustment on the bottom of the switch. Depending on how handy you are, you should be able to get to it easily, if not, move the rear MC out of the way.

It's kind of a guess on how much you have to turn it to work, so plan on a few test rides.

As a fellow tall rider, I also discovered this 'hidden' switch when I adjusted my pedal!

 

[Cycledude]

And make sure the rear brake light switch and light is working properly before and after adjusting it.

 

[Ricsta]

Thanks