Issue: Bike is showing "36" code and engine light, runs rough/barely starts, wont idle.
Before: Was fine, I did maintenance consisting of: changing air filter and spark plugs. Also added an electrical connection onto the existing PC8 beaver distribution box thing.
Troubleshooting: read into how to clear codes and the number you are supposed to stop on (63 or close to that) displays 00 instead of what I expected (either 1 for # of codes or "36" for what is displayed at start up).
#36 appears to be "primary diagnosis of the injector nozzle 1". Thoughts? I was going to remove the tank and verify I had everything I touched connected but figured I'd ask others first.
Before: Was fine, I did maintenance consisting of: changing air filter and spark plugs. Also added an electrical connection onto the existing PC8 beaver distribution box thing.
Troubleshooting: read into how to clear codes and the number you are supposed to stop on (63 or close to that) displays 00 instead of what I expected (either 1 for # of codes or "36" for what is displayed at start up).
#36 appears to be "primary diagnosis of the injector nozzle 1". Thoughts? I was going to remove the tank and verify I had everything I touched connected but figured I'd ask others first.