SpeedStar
XT12 and DL650
Founding Member
2011 Site Supporter
2012 Site Supporter
2013 Site Supporter
Vendor
I am sure many of us have read of the issue that has shown up on some of the other XT12s around the world with a leaking clutch cover gasket caused by a dowel pin that appears to be too long.
As the gasket compresses the leak becomes apparent.
Here is a post from Rocca showing the #5 dowel pin:
http://www.advrider.com/forums/showpost.php?p=16365573&postcount=8604
I am just wondering if the issue has been addressed on the USA and Canada bikes or if this will be an issue that we need to address on our own or possibly through a service bulletin from Yamaha to our dealers?
Has anyone heard anything more on this issue?
As the gasket compresses the leak becomes apparent.
Here is a post from Rocca showing the #5 dowel pin:
http://www.advrider.com/forums/showpost.php?p=16365573&postcount=8604
I am just wondering if the issue has been addressed on the USA and Canada bikes or if this will be an issue that we need to address on our own or possibly through a service bulletin from Yamaha to our dealers?
Has anyone heard anything more on this issue?