madman4049
Active Member
I tried searching but half of this gets rejected in search because it's too short. I have a set of Denali D4 2.0's w/datadim controller I am about to mount on Denali's light bar. I will be running these true hybrid which gives a nice beam pattern however I am also considering mounting a set of baja designs s2 in wide/cornering angled slightly outward to give good side visibility in the woods. Can't remember whose bike this is in the attached image I saved the picture a while back. As a side note is there is clearance to fit a set of DR1s under the nose with clearance of the fender? Probably not getting DR1's just asking.
Thoughts and input would be appreciated, I'm most likely going to add the baja designs s2 unless enough people tell me it's stupid. I want as much light as possible peripheral included, I always seem to find myself wandering backroads, dirt roads, and national forests full of holes, water crossings, and wildlife at midnight for some reason It's happened enough times that I want far reach and wide field of view.
I plan on having the wide angle S2's on a separate switch on the dash only to be used riding in the middle of nowhere so I don't piss off traffic, or when setting up camp at o dark thirty.
Thoughts and input would be appreciated, I'm most likely going to add the baja designs s2 unless enough people tell me it's stupid. I want as much light as possible peripheral included, I always seem to find myself wandering backroads, dirt roads, and national forests full of holes, water crossings, and wildlife at midnight for some reason It's happened enough times that I want far reach and wide field of view.
I plan on having the wide angle S2's on a separate switch on the dash only to be used riding in the middle of nowhere so I don't piss off traffic, or when setting up camp at o dark thirty.
Attachments
-
124.8 KB Views: 55