Baja Fuego HID's

[Alan]

Has anybody installed these: http://www.cyclenutz.com/Baja-Designs-Fuego-4-inch-HID-Driving-Light_p_44.html Got any picture of how you mounted?

 

[baja designs]

Hey alan
I don't have any pictures of a Super Tenere with fuegos mounted but I think I have a pictured of them mounted on a bmws crash bars if you want me to send it to you.

We have a couple LED lights that are cool mounting options for the Super Tenere I can send you some links if you'd like and haven't seen them yet
Please let me know if you have any questions
Thanks
Mike
BD

 

[Mellow]

Kragen 4" HIDs are basically the same thing but much less expensive, I have them mounted on my ST1300 and work great on that bike. I couldn't find a way to mount them on the Super10 as every option I tried meant they would break of the bike fell over. I know some here have mounted them however.

http://www.sidebysidesports.com/4hidlicuac.html
The Kragen's only come w/lights so you'll have to source a wire harness w/relay and switch.

I ended up going with the Rigid Industries 6" Spector LED light bar. It has about the same output as one of the 4" HIDs and is very acceptable to me. Ran several times at night last week on a long trip and they made the difference between riding at night or stopping for the night.

The Rigid Industries light bar comes with everything you'll need.

http://www.assuredautomotiveproducts.com/RIGID-SR-Series-6-Specter-LED-Light-Bar-90661-90622-ACRD-SRS-6.htm

 

[Alan]

Mellow: I have two of the four bulb adv monster LED's mounted where you have you have the LED light bar.

Mike: I'm wanting to mount the Fuego's up around the turn signals and was hoping somebody had worked out a mount before I started designing one.

 

[Mellow]

Alan, the only thing I've seen anywhere close to that which was vendor-supplied was the touratech stuff build for hella ff550 lights... so, sounds like a custom mount is it... let us know what you come up with, if it's slick you may be able to sell it.. you know we are all google-eyed over lights.

 

[~TABASCO~]

Has anybody installed these: http://www.cyclenutz.com/Baja-Designs-Fuego-4-inch-HID-Driving-Light_p_44.html Got any picture of how you mounted?

I have a set of the Fuego's.. I had them on my FJR.. If you want to mount them to the Tenere probably the PIAA light brackets are the quickest. Do you want them on your crash bars or under your head light ? If you mount them under your head light the fender will touch the light under full compression.. The lights are AMAZING !

 

[terrysig]

mellow - how did you configure your rigid setup. do you have a dimmer? in other words what is the difference between pics 2 and 3?

 

[Mellow]

No dimmer, just the angle of the pic, more in front of the bike.

Mine are high beam only.

 

[Tremor38]

I have a set of the Fuego's.. I had them on my FJR.. If you want to mount them to the Tenere probably the PIAA light brackets are the quickest. Do you want them on your crash bars or under your head light ? If you mount them under your head light the fender will touch the light under full compression.. The lights are AMAZING !

Quote from Alan: "I'm wanting to mount the Fuego's up around the turn signals and was hoping somebody had worked out a mount before I started designing one."

 

[~TABASCO~]

I missed all that. I must have been doing about five things at once when I read or skimmed over that. My bad

 

[baja designs]

Alan ive seen a few mounts around the handlebars ill find the link and send it to you