Hi guys
I bought a new xtz1200 for about 5 months
Let's go to the point: since it had about 800 km in release and only in the rev range that goes from 2500 to about 1900 I feel a very annoying vibration, it seems to come from the engine. It is clearly a mechanical noise and not of creaking or any coupling.
The noise decreases a lot after about 15 minutes of use.
In addition, flush with the throttle with any gear at about 3500/4000 rpm you can hear a marked "fluttering" as a distribution.
The bike before these blessed 800 km did not make any noise, very quiet.
Given that the noise makes it more marked the first 15 minutes of use, I think that the clutch bell can be discarded, as I believe it would always do so.
Other details:
-if I accelerate from a standstill even when cold it makes no suspicious noise. It only happens on the go
-It started making this noise when I was on the highway at about 4000 rpm, I went out towards the highway, I started the accelerator again up to about 4500/5000 rpm and I felt as if something was stuck; from then on the problem arose, I also feel a general increase in engine vibrations.
- the noise is distinctly heard from the right side of the engine
Thanks to anyone who will help me