Arrow exhaust

[Turk]

Hello Kostas,
It looks like you have calsci touring screen. What size is that. It looks like an XL but I wasn't sure. Also what are those black tubes-cans on both side of your bike?
Goodlooking bike good job

 

[jajpko]

Hi Kostas, can you tell me more about the flat plate that runs side to side under the speedo head. Why did you do this?

Thanks, jim

 

[RomKnight]

GRRRREAT sound.

Can you comment on right fist feeling on both T and S D-Modes? Did you remap the ECU? Have you noticed changes on fuel economy? And FINALLY ;D does it comes with a DBKiller

 

[xt1200z]

Hello Kostas,
It looks like you have calsci touring screen. What size is that. It looks like an XL but I wasn't sure. Also what are those black tubes-cans on both side of your bike?
Goodlooking bike good job

Yes, the screen is the xl from Calsci and the tubes are the ''mega tool tubes''. More information here:
http://www.advrider.com/forums/showthread.php?t=543030

Hi Kostas, can you tell me more about the flat plate that runs side to side under the speedo head. Why did you do this?
Thanks, jim

I put them because I cover the Hid cables from the xenon lights.

GRRRREAT sound.
Can you comment on right fist feeling on both T and S D-Modes? Did you remap the ECU? Have you noticed changes on fuel economy? And FINALLY ;D does it comes with a DBKiller

Without the Arrow there is a pull about 3000 rpm to 5000 rpm. Now with the Arrow the pull is till the end of red line that come the electronic cut. I didh't yet remaping the ECU, yet isn't avaliable the Power Commander for the Super. The fuel I din't yet measured, soon I will travel. Sure, the exhaust comes with DB killer.

 

[MortiisMachine]

Yet again very informative and thanks for keeping us all up to date. Great to get so much first hand knowledge passed down.

 

[SpeedStar]

Hi Kosta, I noticed in your pics the mirrors appear to be differnt than the stock mirrors. Was there a change between first edition or did you switch them out? I like the shape of yours better.

Also, with the Rox risers, do you feel that the cables are too tight?

 

[Swagger]

..... I noticed in your pics the mirrors appear to be different than the stock mirrors .... did you switch them out? ....

Those are the same mirrors that I had on my 2009 FZ1 .... be careful with 'em. There are two variants, one is base material, the other has a painted satin black finish. The later takes no abuse at all ... I also had issues with the actual mirror .... there seemed to be some form of oxidation behind the glass. Had to get them changed under warranty. Went again in three months.

 

[rural rider]

7 more ponies....cheap hp

RR

 

[SpeedStar]

..... I noticed in your pics the mirrors appear to be different than the stock mirrors .... did you switch them out? ....

Those are the same mirrors that I had on my 2009 FZ1 .... be careful with 'em. There are two variants, one is base material, the other has a painted satin black finish. The later takes no abuse at all ... I also had issues with the actual mirror .... there seemed to be some form of oxidation behind the glass. Had to get them changed under warranty. Went again in three months.

Thanks for the info on the mirrors Swagger. I have KTM superduke mirrors on both of my bikes now. I may go that route as I really like them.

 

[xt1200z]

Hi Kosta, I noticed in your pics the mirrors appear to be differnt than the stock mirrors. Was there a change between first edition or did you switch them out? I like the shape of yours better.

Also, with the Rox risers, do you feel that the cables are too tight?

Yes the mirrors are from FZ1. The visibility is much better now than with the oem mirrors.
Now with the cables that passed under the handlebar aren't tight at all. The throttle works like before with no streching the cables.

New update:
Touratech screen adjuster!

 

[SpeedStar]

Kostas, can you post some pics from the side showing the full range of adjustability for the mount? Also, how are the results?

 

[dcstrom]

The Arrow setup is very cheap - seems like a good deal... $393.76 shipped for the muffler, $713.76 for muffler and headers

http://www.motovationusa.com/mvstore/scripts/prodView.asp?idproduct=1349

Trevor

 

[SpeedStar]

Wow, that is a pretty good price. $139 more for Ti though, and headers for $320. Thanks for the link.

 

[SpeedStar]

Here is a better deal. I just spoke to Megan at Pipecity.com and she can order the Aluminum Arrow slip-on for $385 and the Ti version for $495. The header pipes are $295. They also ship for free in the States.
That is a great price and moves the Arrow up my list for possibilities when the time comes.