ARDUINO

Jlq1969

Well-Known Member
Joined
May 5, 2018
Messages
1,807
Location
Argentina
Yes...I know...it has nothing to do with the S10, but it is interesting because it could solve small (or big) problems for someone who wants to do a project...everything is cheap (the development board and peripheral accessories)...the programming It is simple C language (“if something happens”, “then I execute something”), and the software to program and load is free on the internet (ARDUINO IDE)... I share it, because I used it to activate the sequential gear change of a transmission (65RFE), which came with a 5.7 HEMI...put in an old car. The Arduino board (and its peripherals) has a lot of stability, and is suitable for any project you have in mind... (obviously I would rule it out for controlling the automatic launch of intercontinental missiles with nuclear warheads):)
IMG_6760.jpegIMG_6759.jpeg0BE2A56D-1294-407B-9238-AD249B0577DE.gifA1926474-D497-4067-A17E-E3A12FD70E91.gifE439794B-7204-4F6D-8884-2B83068DDEA9.gif
There are many peripheral accessories that you can add to a project
IMG_6754.jpegIMG_6753.jpegIMG_6752.jpegIMG_6751.jpegIMG_6750.jpeg
 

Jlq1969

Well-Known Member
Joined
May 5, 2018
Messages
1,807
Location
Argentina
:) .At first, it also seemed like it was too much for me... then when you immerse yourself a little, you realize that everything that surrounds you has a basis for what I mentioned previously (TV remote control, motion sensor, automatic door opening. garage door, AA temperature sensor, automatic lighting, fingerprint reader, etc...Before, you had to develop a project, also developing the peripheral modules...today you only have to develop the project, the Hardware for It is cheap to carry out and available…
 

Saint rob

Well-Known Member
Joined
May 26, 2019
Messages
339
Location
Northwest UK
:) .At first, it also seemed like it was too much for me... then when you immerse yourself a little, you realize that everything that surrounds you has a basis for what I mentioned previously (TV remote control, motion sensor, automatic door opening. garage door, AA temperature sensor, automatic lighting, fingerprint reader, etc...Before, you had to develop a project, also developing the peripheral modules...today you only have to develop the project, the Hardware for It is cheap to carry out and available…
All that additional hardware can also be used with Raspberry Pi’s as as an alternative micro controller too. There are simply loads of projects around, usually the biggest problem is actually deciding what you want to do, Python is also another IDE which lends itself to these projects.
 

Jlq1969

Well-Known Member
Joined
May 5, 2018
Messages
1,807
Location
Argentina
Discarding the programming part, for example, the small servos (with a capacity of 1.8kg of torque), and applied to the screws for adjusting the height of the light beam, could be used to manually (with a switch), regulate the height of the lightbeam with, when we ride loaded/unloaded….
IMG_6767.jpeg
IMG_6766.png
 
Top