Anyone mounted a Zumo 395 on a Gen II Bar without vibration issues and how?

[Roge]

I would like to mount my Zumo 395 on the accessory bar in a TT locking mount. My concerns are vibration and obscuring the indicator repeaters. Has any one done this or do you have to use a RAM arm? Does it work.
If it has to go on a RAM arm would it be better on a ball clamped to the handle bars or replacing one of the clamp bolts?

 

[MrVvrroomm]

http://gpsforless.stores.yahoo.net/baseplatei.html

http://www.yamahasupertenere.com/index.php?topic=21451.0

 

[RCinNC]

There's a member here named propsoto who has made a set of aluminum braces that attach to the accessory bar and pretty much prevent all that vibration. I bought a set, and even with both a GPS and a smart phone on the bar, the braces eliminate that vibration. Here's the link that describes the braces:

http://www.yamahasupertenere.com/index.php?topic=19196.0

 

[ScoutDogMan]

propsoto's braces are the way to go, they take the shaking and vibrations out and the cost for them is very minimal.

 

[Wobbler]

My trip last year out West started out with a GARMIN Montana 610 vibration issue.. It was mounted on the crossbar, S10. After they replaced the unit, I decided to re-enforce the gromets on the mounting cradle and that did the trick. Hope that helps. ::022::