ANGLE VALVE STEM

[varacost]

Hi All, I’m getting ready to change my tires for a new set (Anakee 3) and wanted to take the opportunity to replace the valve stems for the angle ones but don’t know the size and cannot find any reference in the service manual. Anyone know the size? Thanks

 

[NickBrewer3]

PJ's Parts is a great place to get them, ask and they may be able to confirm the size for you, but I would bet these are the ones you will need....

http://www.pjsparts.com/catalog/product_info.php?cPath=451&products_id=574

 

[twinrider]

I tried to fit the 82-degree Motorcycle Anchor valves stems and they were too short. The 90s posted above look very similar in length so I'm thinking they won't fit either. If anyone tries them, pls post up the results.

 

[Kevhunts]

Hi All, I’m getting ready to change my tires for a new set (Anakee 3) and wanted to take the opportunity to replace the valve stems for the angle ones but don’t know the size and cannot find any reference in the service manual. Anyone know the size? Thanks

From the USA owners manual...

FRONT and REAR:

Tire air valve: TR412

Valve core: #9100 (original)

 

[pqsqac]

They look too short to clear our wheel flange on the outer part of the rim.

 

[Checkswrecks]

A quick search revealed the previous thread on this and what was found:
http://www.yamahasupertenere.com/index.php?topic=5772.msg101013#msg101013

 

[CDMartin884]

Yea . . . .That thread answer's as much about a usable valve stems for our bike as this one