Alt Rider side sidestand foot fitting issue...

[ADVFireFighter]

Tried to take pics of the issue. I cannot get the top plate at any point to sit flat on the top of the sidestand to get the top plate and bottom plate to marry up. If I put the top plate on, there is no point where all 4 bolts drop to screw on the bottom plate. Suggestions? Do I need to grind a little of that support off?

 

[Hungry Tiger]

Re: Alt Rider side sidestand foot fitting issue...

Just notch the top plate to accept the reinforcing web on the side stand.


Sent from my DROID RAZR using Tapatalk 2

 

[ADVFireFighter]

Re: Alt Rider side sidestand foot fitting issue...

Just notch the top plate to accept the reinforcing web on the side stand.

Thanks Tiger...
I was going to do something like that...
I called them. She never heard of this issue before. Almost found it comical.

 

[Red dust]

I`m really happy with the "big foot" it does work when the ground is soft.

 

[Hungry Tiger]

Re: Alt Rider side sidestand foot fitting issue...

FYI: My first S10 (delivr'd Mar '12) did not have that rib on the side stand foot. AltRider web foot fit fine on that one. That bike was stolen. Repl S10 (Jul '12) had the reinf rib. AltRider has never adjusted their design.

Sent from my DROID RAZR using Tapatalk 2

 

[ADVFireFighter]

Re: Alt Rider side sidestand foot fitting issue...

FYI: My first S10 (delivr'd Mar '12) did not have that rib on the side stand foot. AltRider web foot fit fine on that one. That bike was stolen. Repl S10 (Jul '12) had the reinf rib. AltRider has never adjusted their design.

Sent from my DROID RAZR using Tapatalk 2

BOOM...
Problem solved !
Thanks !

 

[snakebitten]

A stolen S10?

I figured the best anti-theft for the Tenere was nobody really even knows what it is.
And mostly just old coots even "get" them.

Kinda like nobody will hit on your old lady if she is ........

 

[roy]

My sidestand has the rib. My bike was one of the first one over July '11. Unfortunately I have the foot coming today so I will be adding the notch. Altrider should modify their product to correct this over sight.

 

[ADVFireFighter]

I took a small drillbit...
Hole right next to the edge and then hit it with a file till it fit.
Done.

Thanks guys...

 

[roy]

I took a small drillbit...
Hole right next to the edge and then hit it with a file till it fit.
Done.

Thanks guys...

Thanks I will do the same. ::008::

 

[ADVFireFighter]

Here is a pic...
Super simple...

 

[iridemotorbikes]

I have a 2013 and my AltRider side stand foot/plate bolted right up without issue??

 

[roy]

I have a 2013 and my AltRider side stand foot/plate bolted right up without issue??

Does your sidestand have the rib welded on it?

 

[iridemotorbikes]

Does your sidestand have the rib welded on it?

Sure does-- had no issues with the AltRider plate, just loosely put it on/aligned and tightend up..

 

[ADVFireFighter]

Sure does-- had no issues with the AltRider plate, just loosely put it on/aligned and tightend up..

Mine would not.
I could not fit the top plate over the bottom...
In no way shape or form would the top rotate enough for all 4 bolts to drop.
I think it has to do with how far out that rib is attached.

 

[roy]

Fit right on no notch required.

 

[ADVFireFighter]

Fit right on no notch required.

What I think the problem is that some of the "braces" stick out more then others. Mine was over the edge while it looks like yours is just short.

 

[EricV]

What the firefighter said. Just some production variations. I did have to grind mine to fit my early '12 model.

BTW, thanks ADVFireFighter for what you do. Not a job for everyone, but I appreciate that you choose to do it. ::008::