A short video on Otter Lake Road

10éréRider

Active Member
Joined
Jan 31, 2014
Messages
161
Location
Cambridge, Ontario Canada
I borrowed a camera to try to video a few of my rides while on vacation on the Bruce Peninsula. This is my first attempt at posting something on youtube. I have another video I want to post later. It needs an edit as it's a bit long. I had a lot of fun exploring "No Exit" roads as some had trails at the end of them.

I have the "Wonder whats down here" syndrome and this bike is part of the prescribed treatment!! ::013::

https://www.youtube.com/watch?v=OLwHnm6kJuk
 

PowersUSA

Member
2014 Site Supporter
Joined
Jun 12, 2012
Messages
297
Location
USA
Looks like you kept up a brisk pace.

Side note: I wish us mere mortals were able to embed videos
 

10éréRider

Active Member
Joined
Jan 31, 2014
Messages
161
Location
Cambridge, Ontario Canada
WaltM said:
Where was the camera mounted?
I borrowed the camera from my brother and he only had the suction cup mount for his windshield. I wanted a bar mount but didn't have time to find one. So I used the suction cup mount on the windshield. Certainly not the best place...too much bounce which affected the clarity in the video. I hadn't tried the video thing before and wanted to see if I wanted to invest in a camera and mounts.

I took this picture on the north end of that road just before I took that video and you can see the mounting position.

Thanks for the embed help AVGeek.

10éréRider
 

Attachments

AVGeek

Well-Known Member
Founding Member
2014 Site Supporter
Joined
Sep 5, 2010
Messages
2,780
Location
Boulder City, NV 89005
PowersUSA said:
Looks like you kept up a brisk pace.

Side note: I wish us mere mortals were able to embed videos
The trick to embedding YouTube videos: copy the URL from the address bar (NOT from the sharing section of the page), paste the URL into your reply, and change https to http. The forum software takes care of the rest.
 

PowersUSA

Member
2014 Site Supporter
Joined
Jun 12, 2012
Messages
297
Location
USA
AVGeek said:
The trick to embedding YouTube videos: copy the URL from the address bar (NOT from the sharing section of the page), paste the URL into your reply, and change https to http. The forum software takes care of the rest.
Awesome! I think I tried every combination BUT that. Putting my new found power to the test http://www.yamahasupertenere.com/index.php?topic=20193.0
 

10éréRider

Active Member
Joined
Jan 31, 2014
Messages
161
Location
Cambridge, Ontario Canada
AVGeek said:
The trick to embedding YouTube videos: copy the URL from the address bar (NOT from the sharing section of the page), paste the URL into your reply, and change https to http. The forum software takes care of the rest.
I went back and edited the original post and voila...a youtube video! Thanks

10éréRider
 
Top