Search results

Contact Pluric on the other Forum. He is the Master of the bent rim. He has bent and dinged a lot. He will be able to telol you what can and can't be done.

Thanks. I will give it a go this year.

Did anyone go to this last year at Cove? Anyone going this year, September 18 to 20? Whoever went last year, how did you like it?

Had the low seat for awhile. Too hard and too much slant. I removed the cover from the regular OEM and carved off foam so it was level. I then installed a Gel pad from Saddleman. I also added Memory foam at the front part, more comfort for my Twig and Berries ;D Re-stapled the cover, done. The...

Running K60's I find that the front behaves better with 36 psi. Rear I keep at 38, and 40 if 2 up

I used Plasti Dip. Masked everything off, wiped it down and had at it. No sanding required. Surprisingly resilient. Good thing is if you get some damage you can peel the lot off and spray it again. If I do it again I will take the boxes apart. When you remove the masking tape you have to use a...

I used Strap works Footman loops. Drilled and used machine screws with nylok nuts. Used a Dremel to grind away any of the honeycomb plastic in the way. RTV silicon to seal. Fitted Roc Straps. Work great. You can see bags lashed to the top of the panniers in my Avatar. ;D

If you look up one of my old posts it shows my panel. I used Kydex on the advice of a Member. I fitted the OEM Heated grip controller, one rocker switch for heated gear, one for a cig socket under the seat for an air pump, and one for Ridgid Light bar. I made two 'L' brackets and attached these...

Rambo, you on the West or East side of 75? Got a Riding Buddy in Encantada who I visit quite often. He has a GSA. I of course have the better bike and the best color ::013::

I used a flat plate and used the two bolts through the brace to mount. I then bolted the Rigid Brackets to the plate. Light stays tucked in behind the crash bar and is high enough that it cannot hit the Fender on full compression. The crash bar does not interfere with the light output and the...

LOL. Yes, my friends.

Had an '02 Fatboy, did the lifestyle thing but soon got bored with the Bike nights. On day and 2 day trips it was not comfortable. Traded for a new '07 Street Glide in '07. Like night and day. Went all over East Coast with Wife on the back, Nova Scotia, Quebec, comfortable as I had it tricked...

Unleashed my ECU ::015:: Thank you Riva Motorsports Miami. Another happy ECUnleashed customer. Big grins coming home. TC light came on a lot while 'testing' ::013:: Must be the K60's. They did a Dyno before and after, no tuning. A 4 Hp increase and the same for Torque.

I mounted my SR under the headlights and behind the OEM crash bar. I had to fab a simple bracket which made use of the top brace of the crash bar so the light is high enough to clear the fender on compression and protected by the bar. Works great.

Kydex is nice to use. Here are some more examples. http://www.yamahasupertenere.com/index.php?topic=2511.60

Cool. Just Downloaded the App. I just switched from an iPhone to the S4. For anyone reading this and is having trouble connecting their S4 to the G9, i.e. S4 not seeing the G9 in the Bluetooth screen. Follow the below... 1 Turn on your Bluetooth 2 Turn on the G9 with the power button. 3 Once the...

For my Colorado trip in July I used my Leatt ADV Body Protector under a Klim shirt, with a Travers jkt without the armor over that. As we were camping in a different spot every night I had to limit what I took. We were on road and off road. In the heat, the armor and shirt were great as it...

Suzuki were much better organized than Yamaha with presentations and floor layout. Yamaha guys just seemed to be sitting there. I was there Sat and Sun and there were a lot of people. There will be another one next year according to Wolfman. Not sure if it will be in Orlando. Nice to be able to...

Some interest on the ADV Forum. Nobody going from Florida? A Video was posted, looks to be a good size show.

AIM EXPO will be in Orlando 10/18 through 10/20 for consumers. Over 300 Companies so far including OEM's Yamaha and Suzuki. Bonus - all the Pirates will be at Daytona that weekend ::025:: Apparently there will be an ADV Track that you can ride your own bike on as much as you want...