Search results

Sent you private msg Sent from my iPhone using Tapatalk

lol, yes I have lived in Wyoming USA for a while, as well as Europe and far east. Have worked in the oil and gas industry in my younger years. Sent from my iPhone using Tapatalk

I have kept a spare set of coils since the first time I experienced water ingress. So I used this tape on all 8 coils and still had 1/3 left over. Sent from my iPhone using Tapatalk

First of all, you don’t need that much of the tape. I kept it wide and thick, but you can do with less width if you think plumping tape is running out. Additionally I think you would be able to find similar products in Kyrgystan. Secondly, definitely get in touch when you are in Pakistan. The...

Sorry for the late reply, yes regular plumbing tape. And surprisingly no damage to the tape after almost a year. Sent from my iPhone using Tapatalk

Honestly, I don’t think it would matter, the main aim is to keep the water from dripping down the coil chamber. Just make sure there is a tight fit. Sent from my iPhone using Tapatalk

Use any teflon tape. After more than a year, there is no visible damage to the tape or the coil. Sent from my iPhone using Tapatalk

I have been noticing for couple of weeks now that, the ABS light flashes randomly when I rev the engine from cold startup. It goes away once the engine warms up. I have attached just the photo, but the light only flashes for a second. And multiple times when I rev. But then all is normal. Any...

I am on my third tour after using the sealing tape. Will post a picture after I return, but so far no damage to the tape whatsoever. And more importantly no water ingress. As for the tape, you can see which tape I am using. I believe it can withstand higher temperatures. Sent from my iPhone...

Hi, just wanted to share my work around ignition coil and spark plug cavity water ingress. Before I tried putting silicon to stop water from seeping in but without any luck. Tried this before my last 1800km trip and it worked wonders. Not a single drop of water went down to the chamber. And...

Gents, the issue got resolved. A friend told me that due to the trip there could be idle debris or something in the chamber, so try push starting the bike or connecting it to car battery through jumper cables. I connected the bike to the car battery and it took a second to start. Kept it...

Gentlemen, I just complete a 1800km tour to the mountains, which included snow, rain, water crossings (up to knee deep) and gravel. All went smoothly. Every time the bike started on first ignition. There were few bumps while crossing water channels but nothing serious. I came back, parked the...

Ok got it. Will check. Sent from my iPhone using Tapatalk

What and where is Cardon u joint? Sent from my iPhone using Tapatalk

I am all for it. I’ll get IB touch with you once I get to it. Sent from my iPhone using Tapatalk

Yes did that Sent from my iPhone using Tapatalk

I am assuming it’s something to do with the clutch plates. I did not touch the engine Sent from my iPhone using Tapatalk

I recently replaced the clutch plates set. The bike rides perfectly but I can hear a kind of knocking sound when accelerating on an incline. There is no loss of power and the sound is low and only remains for a second or two. This was not there before. Any idea how to diagnose the issue? Sent...

I have many stories to tell regarding what you said. But the good thing is, riding any other motorcycle seems like riding a bicycle. do want to own a lighter bike cause on number of occasions I cursed my self for attempting extreme off-road on this giant. still love the bike.

Hi, my name is Usman Asif, and I am located at Islamabad, Pakistan. The first time I rode a motorcycle was on Aug 21, when I bought the Super Tenere from a friend. after couple of falls and around 15000kms. I can safely say that I am loving it. the bike is a 2010 model with around 60,000 km on...