Search results

Just received from US today. Probably gonna be next week before I get chance to try it.

Just had first valve check at 34k miles. Yes, a bit late, I know... All within tolerance. Also had stock suspension serviced for first time. Significant difference in smoothness of ride. Very pleased. Oil change, air filter change, tb balance and brake and clutch change to do next week when...

Yes, reuse the gasket as I did several years ago and still going strong. Really good mod when dynoed.

Just received and I measure as 35m so looking good...

I actually put a smiley face on that last post but it hasn't shown it. No offence intended.

I share your apprehension on something as important as the braking system. You go first

Good info Rob. Thank you. Don't know whether to cancel the sb8125lls from US now. Are you planning on trying to fit the one you have?

Revzilla suggest we need 4 different lengths for our bikes, as opposed to the 3 we have been working with. This is very confusing...

I've also ordered this as the description gives length as 34mm. We shall see...https://www.ebay.co.uk/itm/160730110341?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=hS1wkmtVSpa&sssrc=4429486&ssuid=2QB2ysfiTqW&var=&widget_ver=artemis&media=MORE

Thank you Rob. Much appreciated

Hi, following this thread and decided to get the speedbleeders. I will order the sb8125ll from US. Can you please confirm where I can get the sb8125l and sb7100 from in uk. Many thanks.

This. Left case opens fine due to clearance because of exhaust. Right side I just remove lid. Really good combination.

New rubber. Battleax T32s. They replace T31s. Not really sure of the mileage from them, not something I bother about. I have used T30s and then T31s extensively on my pan European and loved them. Not so on the S10. Just didn't get the same feeling of security on them. Hoping the T32s are...

Es/ze electronic suspension is the most obvious difference.

I have 2018 ze/es and these were the ones I fitted: Heated Grips (Super Tenere) £304.00 Part Number: 2BS-829A0-00-00 Yamaha Not sure what model you have or where you are so I suppose that might influence the part number. I can confirm that once installed these automatically show up in the...

Don't recall if you can do this on the original seat but on my Sargent I took the front catch thing off and added a washer. This gives it a little more length. I think the number of washers might vary depending on whether the seat flattening mod has been done. I then turn the key whilst...

Sorry I'm late but these might help someone in the future....

Many thanks guys. That makes perfect sense.

Hi. Doing some wiring and came across this unplugged connector. 2018 UK es bike that runs very well. I haven't noticed any change in performance/operation and everything seems to work. Only work I've had done on it is Dyno ECU remap and I wondered if this had been unplugged because of that...

Hi Rob. I've got the front and rear. Just started to strip the bike down to install. Can't quite get my head around how much needs to be removed to simply replace the indicators. Hope it's worth it.... Also installing Komy 3500 lights. Much rather do this than lights on the Christmas tree